Skip to main content
Free shipping
Shipping within 24h
30 days money back guarantee
Purchase comfortable on account
Hotline +49(0)7223-800130-0

Wheel hitch Defender reinforced with screw cap

Product information "Wheel hitch Defender reinforced with screw cap"

Reinforced wheel hitch Land Rover Defender

Heavy duty wheel hubs for Land Rover Defender with screw cap. For vehicles that are used under adverse conditions in the terrain, work or trailer operation. The screw cap reliably prevents the ingress of dirty water when driving through water and protects the wheel bearings from damage.

Durability for off-road and long-distance travel

A reliable drivetrain is especially important for long-distance travel and expeditions and off-road use. Reinforced CNC milled wheel drivers also protect the gearing of the drive shafts and thus extend durability. Heavy Duty wheel drivers made from 41CRoMoV5 are more accurately manufactured and wear out more slowly. The better fit reduces load-shedding in the driveline.

Information

  • Fits all Defender from 1994 > 2016
  • Material 41CroMoV5
  • Surface black powder coated or yellow galvanized

Accessory Items

Reinforced wheel hubs with screw cap for Land Rover Defender
The ENGAGE4X4 wheel drivers for the Land Rover Defender protect the wheel bearings and the gearing from premature wear. The penetration of dirty water or dust is prevented by the sealed screw cap. The screw cap is glued in place with silicone sealant after mounting the wheel flange. This ensures that the wheel bearings and the gearing of the quick-release axles are optimally protected. Due to the precise fit of the gearing, the load change impact is significantly reduced. ENGAGE4X4 Heavy Duty Wheel Driver Defender Every Land Rover Defender is extremely stressed in heavy off-road use. Especially the drivetrain is heavily loaded by additional attachments such as winches, vehicle guards, roof racks, roof tents, interior fittings and larger rims. The additional weight of the vehicle is in the terrain a significantly greater load than on the road.Before starting long-distance travel, it is advisable to check the drive train and depending on the destination and duration, you should consider whether the complete drive train is not reinforced. Application:Trophy, Extreme Off Road, Rally Raid, Military, Expedition Vehicles Product includes:1 wheel driver with screw cap Product Info:Reduces the load change slapLonger durability compared to the standard cast wheel hubsPrevents the penetration of dirty water and dust into the wheel bearings and the teeth of the drive shafts. Information Material: 41CrV4 Tensile strength: RM 800-to 900N/mm² Suitable for Discovery 1 1993 - 1997 Range Rover Classic 1993 - 1997 Defender from 1993 - 2016

€189.00*
Only 1 available
Wheel driver (R) replica
Drive flange for Land Rover rigid axle from 1994 onwards Drive flange for all Land Rover axles from year 1994 (R) replica (flat design), fits all axles and wheel hubs. Information Fits on: Discovery 1, and Range Rover Classic and Defender 90-130 from TDI 300 to TD4 (1994 to 2016). Fits Salisbury axles, Rover axle and P38 axle OEM parts quality Alternative part number FTC859

€16.90*
Only 3 available
Wheel hitch Land Rover Defender (OEM)
Land Rover Wheel Driver for Defender and Discovery 1 The wheel driver or drive flange connects the wheel hub with the drive shaft (stub axle) and transmits the power to the wheel.The drive flange fits the Land Rover front & rear axle. Information Fits on: Discovery 1, and Range Rover Classic and Defender 90-130 from TDI 300 to TD4 (1994 to 2016). Fits Salisbury axles, Rover axle and P38 axle OEM parts quality Alternative part number FTC859

€52.90*
Wheel driver reinforced
Vehicle: Discovery 1 V8
Reinforced wheel hubs - Land Rover Defender In heavy off road use or trailer operation, all drivetrain components are subject to increased wear. Especially the original cast wheel drivers, have problems with the gearing under extreme loads. Another problem favors the rapid wear, over rubber caps gets in the dirty water in the gearing, by the finest sand, and dirt particles, the gearing works itself out over time piece by piece. The load change beating of your Land Rover Defender is increasingly stronger. In extreme cases, the stub axle in the wheel driver can even spin. Wheel hubs with screw caps, on the other hand, do not have this problem. They are much more durable and the material is much stronger than the original wheel drivers. Field of application: Off Road Trailer use Work vehicles Material: 5140 steelSurface: Yellow galvanizedScope of delivery: Screw cap & driver Information Installed quantity / vehicle 4 pieces (quantity to be ordered 2 sets) Reinforced version Suitable for Land Rover Defender from VIN LA > end of production, Discovery 1 & Range Rover Classic from VIN JA to end of production Installation advice: Recommended is not to use the original paper gasket and to use silicone RTV Black.Installed from: VIN - KA430456 narrow - designOE part number: RUC105200 FRC

€209.00*

Accessory Items

Special Bolt Set for Wheel Driver Geomet Coated 10.9
Wheel hitch bolt set non-rusting for all Defender Geomet coated. The screws of the wheel drivers of the Land Rover Defender rust after every winter and it just doesn't look nice anymore. Stainless steel bolts unfortunately cannot be used at this point for various reasons. We have now had a special set of screws manufactured with a high quality Geomet coating with a 465 hour salt spray test. In comparison normal galvanized screws have 120 hours. The original Land Rover screws burnished about 50 hours. The strength class (quality) corresponds to the prescribed original Land Rover screws of 10.9, the yield strength is over 900 Nm. The bolts are manufactured in the EU. Wheel driver bolts Defender Geomet Included in delivery are 20 special screws for all 4 wheel drivers and 1x 3 ml threadlocker "medium strength". Information Screw M10x45 Surface Geomet 500A Grade 10.9 Yield strength 900 Nm

€59.90*
Universal silicone sealant
Hylomar universal sealant (silicone) Universal silicone sealant for a wide range of applications on the vehicle, for example sealing the air intake tract. Excellent gap filling properties Technical class Immediately forms any size or shape of gasket Remains flexible, does not shrink Bonds to metal, glass, ceramics, plastics, fibers and wood Resistant to most solvents Good liquid resistance - not gasoline or diesel fuel Electrical insulator Maximum constant operating temperature 250ºC Neutral cure Tolerant of some oil and grease, make sure surfaces are clean

€14.90*