Skip to main content
Free shipping
Shipping within 24h
30 days money back guarantee
Purchase comfortable on account
Hotline +49(0)7223-800130-0

Spring guide cones Defender front axle (all) from ENGAGE4X4

Product information "Spring guide cones Defender front axle (all) from ENGAGE4X4"

ENGAGE4X4 Polyurethane spring cones for Defender front axle.

This pair of spring guide cones for the Land Rover Defender front axle is made entirely in the EU. To achieve a longer suspension travel, the cones are essential for the Defender to bring the front springs back to the original position. Especially if longer shock absorbers are used. This is an easy and inexpensive way to increase the mobility of the front axle suspension. The off-road capability improves many times over.

The ENGAGE4X4 spring cones are made of HDPE polyethylene. It improves the glide and avoids annoying noise during the movement. The Defender Spring Cones are CNC lathe perfectly shaped to provide maximum resistance with minimum mass.

Properties "Spring guide cones Defender front axle (all) from ENGAGE4X4"
Vehicle selection: Defender , Discovery 1 , Range Rover Classic

Accessory Items

ENGAGE4X4 High Performance Shock Absorber Step 3 for Land Rover Defender
High performance shock absorber set ENGAGE4X4 Step 3 for Land Rover Defender The ENGAGE4X4 high-performance shock absorbers STEP 3 (15-fold adjustable in compression) for the Land Rover Defender are designed on extremely stable monotube damper technology from the Rally Raid Sport. The high-pressure gas filling (5 to 22 bar) makes the dampers extremely resilient with very high durability. The ENGAGE4X4 shock absorbers are able to compensate a spring rate of 50 to 220 kg. Furthermore, there is the possibility to disassemble and repair the shock absorbers. Product details:Piston rod diameter: 22 mmPiston diameter: 46 mmMateria eye: Fortal 7075Oil: MOTOREX high performance damper oilAdjustment system: 40-fold in the compression stage

€3,590.00*
Only 1 available
ENGAGE4X4 spring guide cones Defender 90 rear axle
ENGAGE4X4 Spring Cones on Polyurethane for Defender This pair of spring guide cones for the Land Rover Defender 90 or Discovery 1 is entirely made in the EU. To achieve a longer suspension travel the cones for the Defender are indispensable to bring the rear springs back to the original position. Especially if longer shock absorbers or lowered shock absorber Aufnhamen are used. This is an easy and inexpensive way to increase the mobility of the axle suspension. The off-road capability improves many times over. The ENGAGE4X4 spring cones are made of HDPE polyethylene. It improves the sliding ability and avoids annoying noise during the movement. The Defender Spring Cones are CNC lathe perfectly shaped to provide maximum resistance with minimum mass.

Content: 2 Stück (€144.50* / 1 Stück)

€289.00*
Only 2 available
Damper dome for Defender height adjustable
The height-adjustable ENGAGE4X4 shock domes for the Land Rover Defender front axle allow, for example, the installation of higher springs in conjunction with shock absorbers in original length or vice versa. There is also the possibility to improve the axle articulation on the front axle, especially with progressive springs with coil-off on the front axle. ENGAGE4X4 quality suspension for Land Rover Defender Fully manufactured in the EU, these ENGAGE4X4 height adjustable shock domes for the Defender can be raised to various heights from 50mm to 100mm lowered. This allows to find the right compromise between articulation and spring preload for any suspension / shock combination. The damper domes are made of 6 mm thick high-strength steel (S355), welded using TIG technology, galvanized and coated with polyester powder. The damper domes are particularly resistant to chemicals and weathering. They are also scratch and abrasion resistant. Indispensable when the driving range has to be changed quickly or when the shock absorbers have to be replaced. The actual amount of suspension travel required is not known or cannot be determined. It is possible to install shock absorbers longer than the original ones, even if the standard springs or shock absorbers are longer than the actual upward travel of the springs, without losing compression or spring preload or, on the contrary, to install shock absorbers shorter than the spring height without losing travel. The right compromise between the two extremes! Made in EU Material S355 high tensile steel Surface EPS powder coating Height adjustable

Content: 2 Paar (€199.50* / 1 Paar)

€399.00*
Only 5 available
ENGAGE4X4 High Performance Shock Absorber Set Step 1
ENGAGE4X4 high performance shock absorbers Step1 for the Land Rover Defender have been developed for the highest loads and extreme requirements. The high performance shock absorbers are designed 80% stronger than conventional monotube or twin-tube shock absorbers. High-performance shock absorbers ENGAGE4X4 Step 1 for all Defender All components are CNC machined from high quality materials. ENGAGE4X4 high performance shock absorbers are fully revisable and can also be tuned to suit different spring rates or various requirements. The rear shocks are equipped with a special bronze dust cap, which makes it impossible for dust and mud to damage the oil seal of the shock absorber. Fields of application Off road, trail, trophy, working, protected vehicles, expeditions, Specifications:Type: monotubePiston: 46 mmPiston rod: 22 mmOil: High performance oil OR-SpecialGAS: Nitrogen 5.0Pressure: Standard 9 BarFillable: min.: 5 - max. 22 Bar depending on settingMaterial:Eye: Fortal 7075Piston: ETG100Piston rod: 20MnCR4 high polishedBody: Precision milled steel tube. Fits:Defender; Discovery 1, Range Rover classic.

€2,239.00*
Only 3 available
ENGAGE4X4 spring guide cones Defender 110 / 130 rear axle
ENGAGE4X4 Spring Cones on Polyurethane for Defender This pair of spring guide cones for the Land Rover Defender 110 or the Defender 130, is entirely made in the EU. To achieve a longer suspension travel, the cones for the Defender are indispensable to bring the rear springs back to the original position. Especially if longer shock absorbers or lowered shock absorber Aufnhamen are used. This is an easy and inexpensive way to increase the mobility of the axle suspension. The off-road capability improves many times over. The ENGAGE4X4 spring cones are made of HDPE polyethylene. It improves the sliding ability and avoids annoying noise during the movement. The Defender Spring Cones are CNC lathe perfectly shaped to provide maximum resistance with minimum mass.

Content: 2 Stück (€149.50* / 1 Stück)

€299.00*

Accessory Items

Only 3 available
ENGAGE4X4 progressive suspension springs for Defender 90
ENGAGE4X4 high performance suspension springs including TÜV parts certificate. ENGAGE4X4 suspension springs for the Land Rover Defender 90 are progressively wound with coil-off at the front axle. This allows 40-50mm longer shock absorbers to be installed and significantly increases axle articulation. Due to the extreme progressive winding of the front axle, a very sensitive response is achieved in conjunction with monotube gas shock absorbers. Information Areas of application: On Road, Off Road, Rally Raid Spring winding: Progressive with winding cutoff on the VA. Lifting: Defender 90 +40 to 50 mm Approved: TÜV parts certificate Coating: EPS powder coating

Content: 4 Paket(e) (€214.75* / 1 Paket(e))

€859.00*
Only 8 available
Defender 110 suspension springs + 15 to 30 mm from ENGAGE4X4
ENGAGE4X4 high performance suspension springs including TÜV parts certificate. ENGAGE4X4 suspension springs for the Land Rover Defender are progressively wound with coil-off at the front axle. This allows 40-50mm longer shock absorbers to be installed and significantly increases axle articulation. Due to the extreme progressive winding of the front axle, a very sensitive response is achieved in conjunction with monotube gas shock absorbers. Information Areas of application: On Road, Off Road, Rally Raid Spring winding: Progressive with coil cut-off at the VA Raising: Defender 110 approx +25mm Defender Approved: TÜV parts certificate Coating: EPS powder coating

€859.00*
Only 4 available
%
Tip
ENGAGE4X4 Defender 110 lifting +40 mm progressive winding
Vehicle: Defender 130 TD4 2007-2009
ENGAGE4X4 suspension lift for Land Rover Defender 110. The ENGAGE4X4 progressive heavy duty suspension springs are perfectly adapted to the structure of the Defender and allow driving with better off-road characteristics due to increased suspension travel that can be achieved by other dampers. At the same time, there is more comfort on the road and off-road as well as on slopes. Especially suitable for vehicles with higher roof loads with lifting roofs, roof tents. Oualität Made in Germany Defender suspension springs from Germany. The ENGAGE4X4 suspension spring set consists of four suspension springs with + 30 to 45 mm lift for the Land Rover Defender. The Defender suspension springs are manufactured with the most modern and highest quality standards according to ISO 9001: 2000 and TS 16:949. A special temperature treatment improves the durability and robustness of these ENGAGE4X4 springs. The surface of the spring steel is shot-peened, which significantly improves the mechanical properties of the springs, these processes are carried out specifically for highly stressed chassis springs. The ENGAGE4X4 rookie spring set is made of a special spring steel alloy. The ENGAGE4X4 Defender suspension springs are manufactured with modern CNC machines, so the entire production of the springs is monitored by a state-of-the-art computer system. The surface is applied with a special high performance powder coating on the heated steel, so the spring is optimally protected against corrosion Information FD SiCr, CrSi-leg Block length calculation geometrically approximated Spring set to block length Lc ends low burr by shot peening Spring surface strengthened by shot peening TÜV parts certificate Spring surface strengthened by shot peening, polyester, color: basalt gray, RAL: 7012

€699.00* €939.00* (25.56% saved)