Safety Devices Hoop Rail for Roof Rack Mounting

Safety Devices outer cage for Defender 110 HT with parts certificate. Defender 110 (3 door) Safety Devices roll cage withoutTÜV parts certificate. The outer cage of the Defender 110 HT is similar to the RBL1087SSS of the Defender 90. The aluminum roof of the Land Rover Defender offers little to no protection for the occupants during a rollover. A Safety Devices exterior cage offers several advantages, such as, body protection in severe terrain. Further, the cage is a reliable roof rack system. The safety cage can take a higher roof load better than the original aluminum roof of the Land Rover Defender. ApplicationOn Road, Off Road, Rally Raid, Expedition Vehicles, Passenger ProtectionSpecial Protection Vehicles, Military Vehicles Information EN 10305-1 E235+C Outer tube diameter: 44.45mm Coating: powder coating (matte black) Tested: Tüv Rheinland / TÜV Austria with parts certificate Manufacturer Standard:ISO CertFIA Cert

The Defender has an aluminum body conditional on this lightweight construction, the hardtop is very unstable. For the occupants of the vehicle, the original roof offers no protection. A rollover usually ends fatally.For this reason, the Land Rover Defender NAS (North American Series) was only allowed to be delivered with Safety Devices outer cage in the USA. Safety Devices outer cage Defender 110 Station with parts certificate The Defender 110 (5 door) Safety Devices outer cage with TÜV certificate has been tested exclusively by 4WARD4X4 TÜV. Also for the newer Defender TD4 models there is new parts certificate. Absolute protection even off road Particularly in the terrain the Safety Devices outside cage protects not only the passengers but also the sensitive body of the Defender. In forest areas is quickly times a tree tuschiert and the damage to the Steitenwand can amount to several thousand euros.The stable construction also allows easy mounting of roof tents, roof racks and equipment. Lockable sand tray holders or foldable canister holders can be mounted over the ENGAGE4X4 Cage Carrier, as well as the new ENGAGE4X4 SFJC canister system. Application:On Road, Off Road, Rally raid, Expedition vehicles,Special protection vehicles, Military vehicles. Material:EN 10305-1 E235+COuter tube diameter:44.45mmCoating:Powder coating (matt black) Suitable for:All Defender 110 Station from 1983 to 2013 Manufacturer Standard:Own Quality ControlDekra Verification Manufacturer:Safety Devices (UK)4WARD4X4 Tüv verification

Safety Devices Exterior Cage for Land Rover Defender 130 Safety Devices outside cage with TÜV parts certificate for the Land Rover Defender 130. Hard and heavy terrain demand a lot from the Land Rover Defender in the work. Especially in the mountains or in forests, an outer cage is a useful protection for the body and especially for the occupants of the vehicle.The Safety Devices outer cage for the Land Rover Defender 130 also reliably protects the cargo area. The complex installation should only be carried out by an experienced specialist workshop. The outer cage RBL2587SSS is particularly suitable for mounting an additional roof rack. Information Material 50 mm cold drawn precision steel tube Surface EPS powder coating Assembly time approx. 26 hours (with inner bracket)

Land Rover Defender 90 Expedition Roof Rack The roof rack Defender 90 by ENGAGE4X4, is especially suitable to secure many and heavy loads efficiently and uncomplicated. The airline system milling and the variety of quick-change fittings and threaded inserts make the roof rack Defender 90 by ENGAGE4X4 a multifunctional transport option. Especially on long journeys, the space in the Land Rover Defender 90 is very small.Due to the extremely low weight, the load of the roof rack when empty on the chassis is not of concern. The ENGAGE4X4 roof rack Defender 90 is made in Germany and is made of high-strength aluminum. The roof rack Defender 90 is delivered in parts and is easy to assemble. The roof rack feet are height adjustable and can be attached to any crossbar of the roof rack. Not infrequently, roof racks for the Land Rover Defender 90 weigh more than 40 kg in unloaded condition, so that one would be allowed to load the roof rack regularly only with 35 kg. In the development of the were aimed at a weight-optimized design, so that the roof rack is the lightest of its kind. Advantages of the ENGAGE4X4 expedition roof rack system at a glance low weight Design multifunctional high quality modular buildable low shipping costs easy assembly high stability The low weight of about 25kg The roof rack feet are height adjustable and can be attached to any crossbar of the roof rack. Not infrequently, roof racks for the Land Rover Defender 90 weigh more than 40 kg in unloaded condition, so that one might load the roof rack regularly only with 35 kg. In the development of the were aimed at a weight-optimized design, so that the roof rack is the lightest of its kind. Weight roof basket: 20.5kgTotal weight: 28kg

Safety Devices outer cage for Defender 110 HT with parts certificate. Defender 110 (3 door) Safety Devices roll cage with TÜV parts certificate. The outer cage of the Defender 110 HT is similar to the RBL1087SSS of the Defender 90. The aluminum roof of the Land Rover Defender offers little to no protection for the occupants during a rollover. A Safety Devices exterior cage offers several advantages, such as, body protection in severe terrain. Further, the cage is a reliable roof rack system. The safety cage can take a higher roof load better than the original aluminum roof of the Land Rover Defender. ApplicationOn Road, Off Road, Rally Raid, Expedition Vehicles, Passenger ProtectionSpecial Protection Vehicles, Military Vehicles Information EN 10305-1 E235+C Outer tube diameter: 44.45mm Coating: powder coating (matte black) Tested: Tüv Rheinland / TÜV Austria with parts certificate. Manufacturer Standard:Own Quality ControlTÜV VerificationISO CertFIA Cert