Planar 4DM 3 KW parking heater A blower parking heater like the Planar 4DM-12 3kW is a reliable solution for heating vehicle cabins in trucks, off-road vehicles, passenger cars minibuses or vans, or other other vehicles such as larger construction equipment, boats or yachts. Especially in extremely cold regions, the Autoterm Planar 4DM 3kW parking heater is the first choice for the best value for money. The Planar 4DM is one of the parking heaters with a very low consumption. With the PU-22 control panel, the heating power can be regulated from 1 to 3 KW in eight different levels. It is also possible to set a specific temperature, which is then maintained by the control module. An air blower heater ready to install the Planar 4DM with 3 KW The air heater kit is completely ready for assembly. All major components such as the fuel pump, exhaust and the control unit are included. More detailed information can be found below in the text. With the control unit. Developed the Planar parking heaters for extreme requirements in Siberia and other colder regions of the world. Even at the lowest temperatures, problem-free and reliable heating of cabins is guaranteed. Even in the event of a battery voltage drop, the Planar heater continues to run reliably. All Planar blower parking heaters are absolutely durable and absolutely reliable. Planar parking heaters have an approval the European market (ECE mark). Scope of delivery: Planar 4DM 3 KW Digital control unit PU-22 Pump Rubber holder for metering pump Fuel line 5,5m Fuel line connector Tank suction pipe Exhaust corrugated pipe metal 1m Exhaust silencer End piece f. exhaust pipe Heat insulation f. exhaust pipe Air intake hose with integrated silencer 7,5l fuel tank plastic incl. mounting bracket 3x Cable f. heater, metering pump, control unit screws, nuts, clamps Installation and operating instructions in German

The water level heaters from Autoterm from the Binar 5S series has a heating power of stately 5KW. This is absolutely sufficient to heat engines with a lot of coolant within 20 minutes at extremely low temperatures. Due to its compact design, the Binar 5S is suitable for installation in tight spaces. According to the manufacturer, the Binar 5S is a volume of up to 15 liters. Included in the delivery fastening materials for mounting required attachments or mounting parts such as the fuel pump, exhaust system and a control panel. Depending on the vehicle and installation situation, a vehicle-specific installation kit may be required. Flexible control options for the Binar 5S water heater Various control units are available. The control panel PU-27 is an OLED display, so that the times and functions are easily switched via a text menu. The heating power can be regulated over eight levels so a comfortable temperature can be set in any vehicle cabin. The Binar 5S can be switched on by a timer function via the PU-27 control unit. At the moment the menu is available in English and Russian language. You can find more control options in our online store. Binar 5S - Easy installation in all vehicles The Planar 2D has an ECE marking with it a problem-free and legally safe assembly is ensured.

The Planar air heater from the 2D series has a heating power of 2KW. It is absolutely sufficient to heat a larger vehicle cabin at the lowest temperatures. Due to its compact design, the Planar 2D is also suitable for installation in more compact vehicles, caravans or even boats. According to the manufacturer, the ideal cabin size for a Planar 2D is a volume of 20m³. Included in the scope of delivery fastening materials for mounting required attachments or mounting parts such as the fuel pump, exhaust system and a control panel. Depending on the vehicle and installation situation, a vehicle-specific installation kit may be required. Flexible control options for the Planar 2D parking heater Various control units are available. The control panel PU-27 is an OLED display, so that the times and functions are easily switched via a text menu. The heating power can be regulated over eight levels so a comfortable temperature can be set in any vehicle cabin. The Planar 2D can be switched on by a timer function via the PU-27 control unit. At the moment the menu is available in English and Russian language. You can find more control options in our online store. Planar 2D - Easy mounting in all vehicles The mounting holes correspond to those of the manufacturers Webasto and Eberspächer. One so the possibility with older vehicles a complex and cost intensive repair of a Webasto or Eberspächer toto avoid, a change is problem-free possible. Warm air hoses with 60 mm of diameter can be connected problem-free to the Planar 2D and with an air nozzle. The Planar 2D has an ECE marking so that a problem-free and legally compliant installation is guaranteed.

Autoterm air heater from the Planar 2D series has a heating power of 2KW. It is absolutely sufficient to heat a larger vehicle cabin at the lowest temperatures. Due to its compact design, the Planar 2D is suitable for installation in more compact vehicles, caravans or even boats. According to the manufacturer, the ideal cabin size for a Planar 2D is a volume of 20m³. Included in the scope of delivery fastening materials for mounting required attachments or mounting parts such as the fuel pump, exhaust system and a control panel. Depending on the vehicle and installation situation, a vehicle-specific installation kit may be required. Flexible control options for the Planar 2D parking heater Various control units are available. The control panel PU-27 is an OLED display, so that the times and functions are easily switched via a text menu. The heating power can be regulated over eight levels so a comfortable temperature can be set in any vehicle cabin. The Planar 2D can be switched on by a timer function via the PU-27 control unit. At the moment the menu is available in English and Russian language. You can find more control options in our online store. Planar 2D - Easy mounting in all vehicles The mounting holes correspond to those of the manufacturers Webasto and Eberspächer. One so the possibility with older vehicles a complex and cost intensive repair of a Webasto or Eberspächer toto avoid, a change is problem-free possible. Warm air hoses with 60 mm of diameter can be connected problem-free to the Planar 2D and with an air nozzle. The Planar 2D has an ECE marking so that a problem-free and legally compliant installation is guaranteed.

Universal mounting plate for Planar air heater The Planar mounting plate is made of 3mm stainless steel and is suitable for Planar 2D, 4DM and 44D parking heaters. The mounting plate can be bent approximately in the middle at different angles. Information thickness 3 mm Material stainless steel Adaptable / Kanbar

Lockable air nozzle for a hose connection of 60 mm hot air pipe.The outer diameter of the nozzle is 100 mm.