Halterungen für Offroad Fahrzeuge

Brackets

Halterung Antennen und Arbeitsscheinwerfer für Offroad Fahrzeuge von ENGAGE4X4

Bracket Universal Light/Antenna Large

The practical and versatile bracket universal for light and antenna in large version. ENGAGE4X4 double - mount universal for all off road vehicles. ENGAGE4X4 Universal Antenna or Work Light Bracket Large Ideal for mounting radio & radio antennas as well as work lights or in even be mounted in combination.Made in Germany Material: S237 Surface: Powder coating manufacturer TIGER Holes: 10.5 mm x 2 6.5 mm x 4 fastening Distance between holes: 6.5 mm top 100 mm bottom 135 mm Dimensions: W 15.5 mm x H 60 mm x L 65 mm

€52.90*

ENGAGE4X4 Halterung für Antennen oder Arbeitsscheinwerfer

Bracket universal working headlight or antenna

The practical and versatile bracket universal for light and antenna in with a hole for working headlight or antenna. ENGAGE4X4 bracket universal for all off road vehicles. ENGAGE4X4 Universal antenna or work light bracket. Ideal for mounting radio - & radio antennas as well as work lights.Made in Germany Material: S237 Surface: Powder coating manufacturer TIGER Drill holes: 10.5 mm x 2 6.5 mm x 4 fastening Distance of the drillings: 6,5 mm above 100 mm below 135 mm Dimensions: W 15.5 mm x H 60 mm x L 65 mm

€42.90*

ENGAGE4X4 Doppelbatteriehalter für Land Rover Defender

ENGAGE4X4 Double Battery Holder Defender

ENGAGE4X4 Double battery holder for Land Rover Defender. Double battery holder for Land Rover Defender allows easy mounting of 2 batteries under the Land Rover Defender seat box for double battery management. The mounting of a double battery management system is indispensable in the expedition Defender. On long-distance journeys to remote regions, the starter function must always be guaranteed. All consumers such as cool box, additional lighting, USB and cigarette lighter sockets should be placed on the additional battery.

€179.00*

Fixing set sand plate holder

Colors: V2A Nature

Sand Sheet Mounting Kit for ENGAGE4X4 Foldable Sand Sheet Holders In order to secure the sand plates theft-proof to the foldable sand plate holders of ENGAGE4X4, a special fastening set was developed. It ensures that the sand plates are mounted with the discs over existing holes, and are secured on the inside. Thus the sand plates are protected against theft. Information Material: Disc V2A Variants black / V2A nature

€29.90*

Locking bearing for expedition vehicles

Fastening-locking bearing Closure bearing for the vehicle interior, ideal for attaching tools such as shovels, axes, picks or other things that are needed in an expedition vehicle. The rubber is not UV resistant, so please mount only inside the vehicle. Information Not for outdoor use Surface galvanized and black powder coated

€24.89*

Only 1 available

ENGAGE4X4 EN-UN007SG Klemme für Rundrohr-Montage zum Beispiel am Safety Devices Außenkäfig

Pipe clamp for off road vehicles for mounting lights and antennas

The ENGAGE4X4 aluminum pipe clamps are suitable for mounting on outer cages, spare wheel carriers, roll bars or even lattice tube frames. Especially for off-road vehicle conversions, universal brackets or clamps are very important. They facilitate the installation of antennas, auxiliary headlights, tools, air intakes and much more. Material: Aluminum T4 Clamping range: 35 to 50 mm Screws: V2A

€18.90*

Shovel mounting kit for expedition vehicles

Variant: Installation in the vehicle

Shovel mounting kit for expedition vehicles ENGAGE4X4 shovel mount with locking bearing. Used to quickly and safely stow a shovel on a vehicle. Information Aluminum anodized Closure bearing: sheet metal and rubber (not UV resistant) Closure bearing: rubber exterior (UV resistant)

€79.00*

Sternknauf abschließbar für Sandblech befestigung für ENGAGE4X4 Sandblechhalter

Star knob lockable M8 grub screw

Star knob lockable for sand plate holder practical star knob with M8 grub screw suitable for ENGAGE4X4 foldable sand plate holders or roof racks as well as other off-road vehicle applications. Information Application, securing sand plates, canisters, shovels.

€29.90*

Tred sand plate mounting bracket EVO 2

TRED EVO 2 sand tray brackets The ARB Treds EVO 2 sand plate bracket is a practical 2-piece set with a height of 112.5 mm. It enables a securing height in the range from 20 to 34 mm. To securely mount two stacked boards, you need 1 x T2QP112 and 1 x 1780310. The mounting kit is ideal for use with TRED Pro mounting systems and can be mounted anywhere on the Dovetail rail on the roof rack. It is made of robust, corrosion-resistant steel. The quick-release bolts are designed to easily and securely attach your recovery sheets to your vehicle, while offering the option of a padlock for added security. Thanks to the M6 threaded design, you can attach these bolts to a variety of surfaces. Depending on the installation, mounting location and brackets used, you may need 4 bolts for optimum security and stability. For vertical, side or other than flat mounting of recovery panels, we strongly recommend using two sets of mounting bolts.Replacing the KIT Base RackThe ARB BASE Rack was developed under the premise of "Build, Attach, Adjust, Explore" to allow customers to set up the roof rack and more importantly change how it is configured and used. When developing the ARB BASE Rack, one of the concerns of the development team was to have a complete roof rack system - racks, brackets, guardrails and just as importantly, a wide range of BASE Rack accessories. The BASE Rack's Dovetail attachment point offers several advantages over traditional accessory attachment to carriers, including: Accessories can be attached anywhere on the Dovetail surface, either at the edge of the beam or at the front and rear of each crossbar. There is no need to slide along a T-slot with defined entry and exit points.The easy-to-clean Dovetail surface does not accumulate dirt or debris. Few tools are required to install BASE Rack accessories, which contributes significantly to the modular nature of the rack. The TRED accessories and the sand platesThe accessories can be quickly and easily removed when not required due to height restrictions, for example in a low garage entrance or underground car park, and then reattached at the weekend for camping trips. Integrated channel within the BASE rack structure for cabling additional lighting, solar panels or antennas. With the ARB Treds EVO 2 sand plate mount, you can tackle your adventures in safety and comfort while realizing the full potential of your vehicle on off-road trails.

€79.00*

Your off-road vehicle is already equipped with various accessories from the factory. However, some Defender and Discovery, especially the older vintages, are equipped her sporadically, especially in terms of comfort and convenience. Those who want to take full advantage of their off-road vehicle and actually use it in nature and from less traveled routes will want to install one or two accessories. For this purpose, our universal mounts are just what you need. We offer a selection of special brackets that can be installed in the Freelander, Discovery, Defender and Range Rover in the interior or even outside and ensure that accessories, provisions, canisters or spare parts and tools do not slip. Ensure safety with different holders for different accessories - by this I mean safety for you as a driver, because nothing can slide back and forth in the car, but also safety for the material and accessories and your luggage that you are transporting. The holders secure the load so that nothing breaks.

Practical brackets for off-road vehicles

We offer a wide range of brackets for off-road vehicles. These are practical and can be used in many ways. Whether you're looking for universal mounts for work lights, mounts for tools and antennas, or roof racks for different cargo, you're sure to find what you're looking for in our range. We offer mounting plates, roof racks and all kinds of mounts for off-road vehicles that are easy to install. Thanks to the appropriate tools, clamps and screws, as well as the included mounting instructions, it's a breeze to attach the various brackets to the inside or outside of your Defender, Freelander, Range Rover or Discovery.

Practical and universal

Our brackets for off-road vehicles can be mounted on the vast majority of models in no time at all. Contact us directly if you are looking for a specific mount or simply browse through our extensive range. Order the practical mounts easily and quickly online! We deliver with reliable delivery services within a short time conveniently to your home. Find universal side mounts compatible with the ENGAGE4X4 roof rack system or small and incredibly practical drink holders for the cockpit. Click universal antenna or work light mounts and add the products to the shopping cart, which you can review before ordering. We carry various holders for the trunk, which can be used to store canisters and materials, easy to install cup holders for the center console, which are also suitable for other items. Just look around and choose what is suitable for your Land Rover and your needs.