ENGAGE4X4 adapter plate for Safety Devices cage mounting. The adapter plates are for mounting on the ENGAGE4X4 roof rack and the Safety Devices Hoop-Rail, so you can vary the prositions of the roof rack on the outer cage. At the same time, the adapter plates can be used for mounting antennas, auxiliary lights or other accessories. Information Material S355 Surface black powder coated Made in Germany

Air baffle ENGAGE4X4 roof rack for 3 struts The air deflector prevents the second or third cross strut from swinging up on vehicles with a sloping roof and thus the noise that this causes. The air baffle is made of 3 mm aluminum and must be screwed or riveted to the front of the roof rack frame. Material: AlmG 3Surface: Anodized black

Planar 4DM 3 KW parking heater A blower parking heater like the Planar 4DM-12 3kW is a reliable solution for heating vehicle cabins in trucks, off-road vehicles, passenger cars minibuses or vans, or other other vehicles such as larger construction equipment, boats or yachts. Especially in extremely cold regions, the Autoterm Planar 4DM 3kW parking heater is the first choice for the best value for money. The Planar 4DM is one of the parking heaters with a very low consumption. With the PU-22 control panel, the heating power can be regulated from 1 to 3 KW in eight different levels. It is also possible to set a specific temperature, which is then maintained by the control module. An air blower heater ready to install the Planar 4DM with 3 KW The air heater kit is completely ready for assembly. All major components such as the fuel pump, exhaust and the control unit are included. More detailed information can be found below in the text. With the control unit. Developed the Planar parking heaters for extreme requirements in Siberia and other colder regions of the world. Even at the lowest temperatures, problem-free and reliable heating of cabins is guaranteed. Even in the event of a battery voltage drop, the Planar heater continues to run reliably. All Planar blower parking heaters are absolutely durable and absolutely reliable. Planar parking heaters have an approval the European market (ECE mark). Scope of delivery: Planar 4DM 3 KW Digital control unit PU-22 Pump Rubber holder for metering pump Fuel line 5,5m Fuel line connector Tank suction pipe Exhaust corrugated pipe metal 1m Exhaust silencer End piece f. exhaust pipe Heat insulation f. exhaust pipe Air intake hose with integrated silencer 7,5l fuel tank plastic incl. mounting bracket 3x Cable f. heater, metering pump, control unit screws, nuts, clamps Installation and operating instructions in German

Fitting for ENGAGE4X4 roof racks and airline rails. The Automotive Fitting is designed to secure loads for vehicles. The fitting for the airline rails is made of plastic, this ensures that there is no unpleasant noise on slopes. Information Made in Germany Tensile load 500 Kn

Battery disconnect switch for example for winch installation High power battery disconnector Amp (5 sec) 2500 A/standby 250, volt 12/ 24 Number of holes 2 distance mounting hole 100 mm Degree of protection IP 65 Type 1 battery With rotary/pressure switch. Electrical specifications Volt 24 A/permanent 250 Amp (5 sec) 2500 Physical specifications Number of holes 2 Abs. holes mm 100 Degree of protection IP 65 Type 1 Battery

The water level heaters from Autoterm from the Binar 5S series has a heating power of stately 5KW. This is absolutely sufficient to heat engines with a lot of coolant within 20 minutes at extremely low temperatures. Due to its compact design, the Binar 5S is suitable for installation in tight spaces. According to the manufacturer, the Binar 5S is a volume of up to 15 liters. Included in the delivery fastening materials for mounting required attachments or mounting parts such as the fuel pump, exhaust system and a control panel. Depending on the vehicle and installation situation, a vehicle-specific installation kit may be required. Flexible control options for the Binar 5S water heater Various control units are available. The control panel PU-27 is an OLED display, so that the times and functions are easily switched via a text menu. The heating power can be regulated over eight levels so a comfortable temperature can be set in any vehicle cabin. The Binar 5S can be switched on by a timer function via the PU-27 control unit. At the moment the menu is available in English and Russian language. You can find more control options in our online store. Binar 5S - Easy installation in all vehicles The Planar 2D has an ECE marking with it a problem-free and legally safe assembly is ensured.

The practical and versatile bracket universal for light and antenna in large version. ENGAGE4X4 double - mount universal for all off road vehicles. ENGAGE4X4 Universal Antenna or Work Light Bracket Large Ideal for mounting radio & radio antennas as well as work lights or in even be mounted in combination.Made in Germany Material: S237 Surface: Powder coating manufacturer TIGER Holes: 10.5 mm x 2 6.5 mm x 4 fastening Distance between holes: 6.5 mm top 100 mm bottom 135 mm Dimensions: W 15.5 mm x H 60 mm x L 65 mm

The practical and versatile bracket universal for light and antenna in with a hole for working headlight or antenna. ENGAGE4X4 bracket universal for all off road vehicles. ENGAGE4X4 Universal antenna or work light bracket. Ideal for mounting radio - & radio antennas as well as work lights.Made in Germany Material: S237 Surface: Powder coating manufacturer TIGER Drill holes: 10.5 mm x 2 6.5 mm x 4 fastening Distance of the drillings: 6,5 mm above 100 mm below 135 mm Dimensions: W 15.5 mm x H 60 mm x L 65 mm

LED auxiliary headlights with side illumination and E-approval. LED auxiliary headlight Compact with E-approval for legal mounting on the vehicle or on the roof rack . The powerful HC auxiliary headlight has about 2100 lumens / headlight and a range of more than 400 meters in total. At 220 meters, the Cargo auxiliary headlight still reaches a light output of one Lx.Information Physical Specifications Size mm 97x78x73 Shape Square Protection class IP 69K LEDs With LED Connection Multi-connections Type 1 LED spotlight Material Cast aluminum E-approval Yes Color Black Approval ECE R112 Material hood Polycarbonate Mounting U-clamp with 1 screw Cable length mm 500 Ref. no. 12.5 Diagram nr. 172259bs Lumen 2098 Electrical specifications W 29 Volt 10-30

Off Road LED Light Bar LED Light Bar for perfect illumination in the working or driving area of off-road vehicles. Made of a very robust die-cast aluminum housing with polycarbonate lens. The holders are made of stainless steel. Idel for mounting on roof racks or towing vehicles. Information W 200 Lumen 16000 Volt 10-30 Material hood polycarbonate Material housing aluminum Reflector system Point light radiation Shape Straight, Color Black Type 1 40 LED, Brackets side mounted Mounting standing/hanging Adjustment-upward 15° Adjustment-down 90 Protection class IP 67 Dimensional drawing 172098t amp 12.5/6.25 Kelvin 6000 Size mm 1060x80x41 E-approval No Approval CE/EMC Material holder stainless steel Cable length mm 500 Plug/sleeve Plug/sleeve Physical specifications Material hood Polycarbonate Material housing Aluminum Reflector system Point light radiation Shape Straight Color Black Brackets Side mounted Mounting Standing/hanging Adjustment-upward 15° Adjustment-downwards 90° Protection class IP 67 Lumen 16000 Kelvin 6000 Size mm 1060x80x41 E-approval No Diagram no. 172098bs Approval CE/EMC Material holder Stainless steel Cable length mm 500 Plugs/sleeves Plugs/sleeves Electrical specifications Type 1 40 LED W 200 Amp 12.5/6.25 Volt 10-30

Carling Condura V complete switch for offroad accessories. Assemble your Carling Condura V switch for the following offroad accessories or electrical equipment. Working lights Defender front on/off Working light rear Defender on/off Lightbar on/off LED on/off Carling Technologies are among the best switches on the market in Boots & Offroad vehicles.

Dash Camera - Dashboard Camera Protect yourself! The numbers show that insurance fraud like" Crash for Cash "- offenses currently cost honest policyholders almost millions of euros per year. This dash camera provides crucial evidence of a traffic accident. The dash camera helps you fight an insurance fraud. You can help to reduce the time of the claim settlement and the accident process by using an amatrure "dash camera". Also it can help to reduce your insurance premium. It is extremely easy to install with plug and play installation. Main Features: Video Quality - 1080 pixel resolution means important details like vehicle license plates are more visible. File Protection - A built-in shock sensor works in conjunction with a file lock function to ensure that important recordings are always protected from being overwritten. Auto Start / Stop - The camera automatically starts recording when the vehicle ignition is turned on, so recordings are never missed. Loop Recording - Older files can be overwritten automatically, so recording never stops because the memory card is full. Backup Battery - A built-in rechargeable battery provides backup power so recordings can always be completed in the event of a power failure. Digital camera - With a camera mode, the device can be used as a digital camera. Additional images can be captured in the event of an incident. Fine details are captured with recording resolutions up to 1080 pixels and a four-digit 120-degree glass lens. Loop recording and the automatic start / stop function ensure that videos are never missed. A built-in shock sensor and file lock protect important video recordings. This model features a large wide screen for easy setup and playback. Also included is a license plate entry for recording vehicle details in any video.Features: Video resolution - 1,920 x 1,080 at 25 frames per second. Camera resolution - 12 megapixels Display size - 2.7 " Lens type - glass with 4 elements Viewing angle - 120 degrees Aperture - F / 2.4 Battery - 200mA Li-Po Memory card (not included) up to 32GB Audio recording - Yes Shock sensor - Yes Loop recording - Yes Auto Start Stop - Yes Night vision LEDs - Yes License plate stamp - Yes USB port - Yes HDMI connection - Yes Weight - 56 g Dimensions (L x W x H) - 87 x 54 x 44 mm

ENGAGE4X4 Double battery holder for Land Rover Defender. Double battery holder for Land Rover Defender allows easy mounting of 2 batteries under the Land Rover Defender seat box for double battery management. The mounting of a double battery management system is indispensable in the expedition Defender. On long-distance journeys to remote regions, the starter function must always be guaranteed. All consumers such as cool box, additional lighting, USB and cigarette lighter sockets should be placed on the additional battery.

The ENGAGE4X4 dual battery management system serves to preserve the starter battery. Indispensable and safety relevant for vehicles with many power consumers. Dual Battery Management System A double battery management system should not be missing in any off-road vehicle if additional power consumers such as winches, compressor coolers, additional sockets or searchlights are installed. This is the only way to ensure a safe journey home far from roads and civilization. The technology behind it aims to switch the dual battery management system with micro controller to the second battery when needed. The dual battery management system of the German brand ENGAGE4X4 was developed by us for the highest requirements and manufactured in Germany. Information 200a relay Binder cable / sensor connection cable Rubberized housing Membrane keypad Working temperature range: -40 ° to +85 ° Power consumption: 12 Volt Control: Software controlled

ENGAGE4X4 Heavy Duty Strap Net The ENGAGE4X4 Heavy Duty Strap Net is the perfect complement for the ENGAGE4X4 roof rack with Airline profile. It is designed for securing loose items. Automotive quick fastening eyelets are sewn into the corners.

Lashing strap with clamp lock from ENGAGE4X4 Suitable for the ENGAGE4X4 Airline roof rack the matching lashing strap with clamp lock according to DIN EN standard 12 195 2 with automotive plastic fitting for quick fastening in the ENGAGE4X4 Airline rail system. Technical data roof rack lashing strap: Lashing force LC: 500 daN STF: 200 daN SHF: 50 daN Length: 2000 mm LGF: 500 mm black or orange Approved fasteners for the ENGAGE4X4 roof rack

ENGAGE4X4 roof rack for various all-wheel drive vehicles and vans. Aluminum Expeditons roof rack with airline system milling from ENGAGE4X4. The lightest and most flexible roof rack on the market. The Airline system milling allows an absolutely safe and above all easy stowage of cargo on the roof rack. A variety of quick release fittings, load securing nets and quick release straps are available. Advantages of the ENGAGE4X4 roof rack system at a glance low weight design multifunctional high quality modularly buildable low shipping costs easy assembly high stability the low weight of about 22kg Roof rack platform kit Weight roof basket: 19kgTotal weight: 27kg

Expedition roof rack usable for various all-wheel drive vehicles and vans. Aluminum roof rack with airline system milling from ENGAGE4X4. The lightest and most flexible roof rack on the market. The Airline system milling allows an absolutely safe and above all easy stowage of cargo on the roof rack. A variety of quick release fittings, load securing nets and quick release straps are available. Advantages of the ENGAGE4X4 roof rack system at a glance low weight design multifunctional high quality modularly buildable low shipping costs easy assembly high stability the low weight of about 25kg Roof rack platform kit Weight roof basket: 22.5kgTotal weight: 28kg

ENGAGE4X4 aluminum roof rack for various off-road vehicles (short cut partial roof rack) with dimensions 140 cm x 145 cm and feet for the rain gutter. The ENGAGE4X4 roof rack is the lightest and most flexible roof rack on the market. The Airline system milling allows absolutely secure and, above all, easy attachment of cargo to the roof rack. A variety of quick release fittings, load securing nets and quick release straps are available. Roof racks - weight issue In Germany, the maximum permissible roof load is 75 kg. However, some roof rack systems can already have an inherent weight of 30 kg to 45 kg at a length of 1.4 m. It is not uncommon for roof racks for the Defender 110 to weigh up to 65 kg. Not at all advantageous from a technical point of view. A high weight of the roof rack increases fuel consumption and at the same time minimizes the roof load. Basically, such a roof rack becomes almost superfluous if you are very strict with the law.The ENGAGE4X4 roof rack is multifunctional. The unique AL Airline rail profile allows countless options for attaching loads and equipment. Over 15 different quick connectors for securing loads are available. So everything can be stowed safely, quickly and conveniently on any roof rack.Advantages of ENGAGE4X4 Expedition roof rack at a glance low weight design multifunctional high quality modularly buildable low shipping costs easy assembly high stability low weight of about 15kg Information weight roof basket: ca 12kg Total weight: ca 19kg Length: 140L X 145B

Expedition roof rack usable for various all-wheel drive vehicles and vans. Aluminum roof rack with airline system milling from ENGAGE4X4. The lightest and most flexible roof rack on the market. The Airline system milling allows an absolutely safe and above all easy stowage of cargo on the roof rack. A variety of quick release fittings, load securing nets and quick release straps are available. Advantages of the ENGAGE4X4 roof rack system at a glance low weight design multifunctional high quality modularly buildable low shipping costs easy assembly high stability the low weight of about 18kg Roof rack platform kit Weight roof rack: 18kg

ENGAGE4X4 tensioning strap for airline rail The ENGAGE4X4 are special tensioning straps for airline rails with 25 mm airline system milling. With a length of 2.00 meters, this strap with ratchet is the safest solution to secure cargo professionally in and on the vehicle (ENGAGE4X4 roof rack). The straps are made in Germany and manufactured according to DIN EN 12 195-2. Technical data / Information Manufactured: In Germany according to DIN EN 12 195-2 Tensile force LC: 500 daN Colors: black / orange Tensioning element: ratchet

Roof rack for expedition vehicles, vans and trucks. The ENGAGE4X4 roof rack system is the most flexible and lightest roof rack system on the market, adaptable for various all-wheel drive vehicles with a roof length of 280 cm and a width of approximately 145 cm. The airline profile allows absolutely secure and, above all, easy attachment of cargo and equipment on the roof rack. A variety of quick release fittings, load securing nets and quick release straps are available. Roof rack - weight issue In Germany, the maximum permissible roof load is 75 kg. However, some roof rack systems can already have an inherent weight of 30 kg to 45 kg at a length of 1.4 m. It is not uncommon for roof racks for the Defender 110 to weigh up to 65 kg. Not at all advantageous from a technical point of view. A high weight of the roof rack increases fuel consumption and at the same time minimizes the roof load. Basically, such a roof rack becomes almost superfluous if you are very strict with the law.The ENGAGE4X4 roof rack is multifunctional. The unique AL Airline rail profile allows countless options for attaching loads and equipment. Over 15 different quick connectors for securing loads are available. So everything can be stowed safely, quickly and conveniently on any roof rack.Advantages of ENGAGE4X4 Roof rack features at a glance low weight stylish design multifunctional due to airline profile high quality Made in Germany modularly buildable versatile adaptable low shipping costs easy assembly high stability aluminum T6 high strength The low weight of about 12 to 27 kg Information Weight roof basket: about 19 kg

Universal integratable information display for dashboard mounting. The integrated information display with all-wheel altimeter for expedition vehicles fits perfectly into any long-distance vehicle, especially in rough and uneven terrain in faraway countries provides valuable data on the orientation of the vehicle (angle of inclination, roll angle) as well as the speed. The bright display also features an electronic compass to aid navigation and a light sensor to automatically adjust the unit's backlight to the brightness outside. Because the altimeter is connected via GPS, its speed, location and time measurements are much more accurate than with the original vehicle displays, providing drivers with the information they need for expeditions around the world. Features and functions: Integrated speaker Volume +/- & mute Power on / off Light sensor (automatically adjusts backlight brightness to outside brightness to reduce glare) GPS icon (displayed when a successful GPS connection has been established) Current time (hours / minutes - automatically calibrated by GPS) Voltage Vehicle speed Pitch angle Roll / pitch angle Altitude Temperature (internal) Electronic compass (calibrated with GPS) Specification: Tilt angle: -40 degrees - +40 degrees Roll angle: -40 degrees - +40 degrees Temp. accuracy: +/- 1ºC Voltage measurement range: DC 5-30V Speed accuracy: <0.36 km / h Radio transmission frequency: 2.4 GHz Operating temperature: -40ºC - + 80ºC Power supply: DC 10V ~ 30V

Sand Sheet Mounting Kit for ENGAGE4X4 Foldable Sand Sheet Holders In order to secure the sand plates theft-proof to the foldable sand plate holders of ENGAGE4X4, a special fastening set was developed. It ensures that the sand plates are mounted with the discs over existing holes, and are secured on the inside. Thus the sand plates are protected against theft. Information Material: Disc V2A Variants black / V2A nature