Mathy-T gear oil additive 0,5 L
Product information "Mathy-T gear oil additive 0,5 L"
The MATHY-T high performance gear oil additive has been specially developed for manual & transfer gearboxes. It is a viscosity specific gear oil additive for oils on mineral as well as
semi-synthetic and even fully synthetic basis applicable. Compared to other additives, the Mathy gear oil additive is suitable for all gear oils of the viscosity classes from 75 to 140, especially for
gear oil for high loads or a high pressure resistance and also for hypoid oils.
Mathy gearbox additives help with
- reduces or eliminates technical problems
- reduces wear of gearbox bearings/gears
- minimizes wear of ring and bevel gears
- reduces vibration in gearboxes and/or differentials
- avoids too much friction in the gearbox ("hooks when shifting")
- The fields of application
- Mineral-based, semi-synthetic and fully synthetic oils
- Normal and high-alloy transmission and hypoid oils
- to improve the running-in process
- at high loads and temperatures
- for running noise and high wear
- high corrosion protection, even with long service life
Dosage
- at least 20% of the manual transmission oil quantity
- at least 10% for manual transmissions and axle drives (differentials) of all types of vehicles with a mileage of 100,000 km - perform an oil change after 1,000 km (cleaning phase) and refill again with at least 20% MATHY-T
- 50% of the transmission oil quantity in the case of transmissions/differentials with distinct running noises (such as "transmission yelp")
Accessory Items
Engines Additive for Land Rover Diesel Engines Mathy-M 1 liter
€53.99*
Additive Land Rover Diesel Engines - Mathy-M Engine Additives
Why dump an engine additive into your Land Rover diesel engines? When today's oils are soo good? This is partly true, in the lubricant industry a lot has been done, there are quite good engine oils and about a good engine oil you can achieve a lot and extend life time of the engine significantly. But it can be done better, especially with vehicles that are sometimes left standing for a long time and you don't know exactly which oil is used. Also important are regular internal cleaning of the engine and the addition of an additive. Additives are specially designed oils so prepared to increase the temperature performance of the engine oils, that is, in plain language, the continuous load of an oil until the lubricating film tears, to minimize deposits, to better maintain seals (especially oil seals and rubber seal) to prevent oil leaks. In short, to keep the engine and the oil borings clean and to provide better lubrication.
Engine additives recommended for expedition vehicles on long-distance trips.
4WARD4X4 Maintenance has tested MATHY-M for a long time and is convinced, the long experience of the manufacturer is legendary. Mathy-M is a high performance engine oil additive developed and manufactured according to the latest technology. No solid lubricants were used and it serves to increase the performance of all engine oils based on mineral oil, semi-synthetic and fully synthetic basis of SAE classes 0 to 60.
Areas of application
engines of all types (gasoline, diesel, Wankel and gas engines)
to high fuel consumption
in case of high loads and high wear
in case of too loud and unsteady running as well as vibrations
can also be used with AdBlue
Dosage
10% of the total oil quantity for normal use of the vehicle
20% of the total oil quantity for sport purposes, high loads, trailer operation, motorcycles, turbo or compressor engines