Only 2 available

Air strut with damper complete for Discovery 3

Land Rover Discovery 3 air strut - shock absorber rear axle Air strut rear axle complete for Land Rover Discovery 3 (Reproduction parts- Quality) Information Installed quantity / vehicle 2 pieces Parts quality OEM Fits all models except VIN: (V) 6A392100 to (V) 6A9999 ET-No: RPD000309

€428.40*

Buchse Schubstreben für Land Rover Defender und Discovery 1 Teilenummer NTC1772G

Axle Bearing Defender & Discovery 1 Push Strut Rear Axle

Axle bearing thrust strut rear axle Defender & Discovery 1. OEM suspension bushing for the thrust struts on the rear axle (axle side). Fits all Land Rover Defender, Discovery 1 and Range Rover Classic models. Information Installed quantity/vehicle 2 pieces Parts quality OEM Fits Land Rover 90-130 (all), Defender (all) Discovery 1 and Range Rover Classic.

€14.90*

Kugelgelenk Dreieckslenker Hinterachse für Defender Und Discovery 1

Ball joint

Ball joint wishbone (adjustable) Ball joint for Land Rover wishbone (adjustable) on the rear axle. Suitable for all Defender, Discovery 1 and Range Rover classic models. In case of wear the joint can be readjusted. Information Reproduction quality Installed quantity 1 Adjustable

€24.90*

RBK500280 Traggelenk für Range Rover Sport und Discovery 3 und Discovery 4

Ball joint wishbone Discovery 3 / 4 and Range Rover Sport

Suspension joint wishbone below for Discovery 3 / 4 and Range Rover Sport. Land Rover Discovery 3 and Discovery 4 and Range Rover Sport suspension joint for front axle wishbone below. Suitable for left and right ropes. Information Installed quantity / vehicle 2 pieces Quality OEM Suitable for Discovery 3 / Discovery 4 and Range Rover Sport

€36.80*

Only 2 available

Bearing bush tie rods (frame side)

Bearing tie rods for all Land Rover Defender & Discovery 1. Tie rod rubber bearing on frame for all Defender and Discovery 1 models up to chassis number VA130784 in OEM parts quality. Information Up to chassis number: VA130784 Installed quantity/vehicle 4 pieces (quantity to be ordered 1 set = 4 pieces)

€13.90*

Only 4 available

Bearing bush tie rods (frame side) Defender TD5- and TD4

Bearing tie rods for all Land Rover Defender TD5 and TD4. Tie rod rubber bearing on frame for all Defender TD5 and TD4 models up to chassis number (V) VA130785 in LR Genuine parts quality. Information Until chassis number: VA130785 Installed quantity/vehicle 4 pieces (quantity to be ordered 4 pieces)

€5.49*

Lagerung Schubstrebe Hinterachse für Land Rover Defender & Discovery 1

Bearing thrust struts Land Rover Defender and Discovery 1

Thrust strut bearing for Land Rover Defender and Discovery 1 Thrust strut bearing original Land Rover Genuine Land Rover pushrod bearing for mounting on the vehicle frame. Suitable for all Defender, Discovery 1 and Range Rover Classic models. Information Installed quantity 2 pieces/vehicle (Quantity to order 1 pair - quantity delivered 2 pieces) Land Rover original part

€122.23*

Schraubensatz Dreiecksgelenk Land Rover Defender und Discovery 1

Bolt set wishbone joint

Set of bolts for central rear axle joint. Assembly bolts for the central rear axle joint for the Land Rover Defender, Discovery 1, Range Rover Classic (all). Often the central joint of the upper axle suspension on all Land Rover rigid axle models is so corroded that the bolts can only be removed by extreme means. It is highly advisable to replace these bolts at the same time. Information Installed quantity/vehicle 2 pieces (included in the set) Parts quality OEM

€9.90*

Only 10 available

Bolzen Kugelgelenk Stabilisator Vorderachse / Hinterachse Land Rover

Bolzen für Kugelgelenk NTC1888 Stabilisator Land Rover Fahrzeuge Der Bolzen Kugelgelenk Stabilisator Vorderachse / Hinterachse ist ein wichtiges Ersatzteil für alle Land Rover Fahrzeuge, speziell für den Defender und Discovery 1 sowie den Range Rover classic. Es ist ein unverzichtbares Teile beim erneuern des Bauteils NTC1888 es sorgt für nötige die Stabilität und Sicherheit Ihres Fahrzeugs. Hergestellt aus robustem Material und in OEM-Qualität, garantiert dieses Bolzen Kugelgelenk eine lange Lebensdauer und Zuverlässigkeit. Er ist perfekt geeignet für den Austausch von abgenutzten oder beschädigten Teilen und gewährleistet eine reibungslose Funktion der Vorder- und Hinterachse. Das Bolzen Kugelgelenk ist passgenau für verschieden Land Rover Modelle und entspricht den höchsten Standards für Qualität und Leistung. Es ist einfach zu installieren und bietet eine perfekte Passform, um einwandfreie Funktion und Sicherheit zu gewährleisten. Vertrauen Sie auf das Bolzen Kugelgelenk Stabilisator Vorderachse / Hinterachse für Ihren Land Rover und genießen Sie eine verbesserte Fahrstabilität und ein komfortables Fahrerlebnis. Mit der Teilenummer RYG501590 ist es das ideale E

€7.90*

Only 2 available

Bushing A-Frame (Dreicks handlebar) rear axle Land Rover

Discover the high quality bushing for the rear wishbone of the axle suspension of your Land Rover Defender, Discovery 1 or Range Rover Classic. This high quality was installed for vehicles from 1982 up to the 2009 model year. Book A-Frame Land Rover several modelsWith thespare part number NTC1773 you can ensure that this suspension bushing fits your vehicle.The bushing was developed specifically for the rear wishbone also called A-frame of the axle suspension of the Land Rover and also finds use Discovery 1 and Range Rover Classic. It provides a precise fit and for installation, you will need skilled personnel, and special tools to get your vehicle back on the road quickly. back on the road.Here is a brief explanation of the spare part NTC1773GRugged Material: Our bushing is made of high quality material that can withstand the rigors of off-road and extreme conditions. It offers excellent durability and resistance against wear and tear.Optimal damping: the rubber bearing bushing is specially designed to reduce vibration in the axle suspension and provide optimal damping and mobility. As a result, it improves ride comfort and provides a smoother ride, both on and off road.Durable Performance: Our bushing is designed with durability and reliability in mind. It offers excellent resistance to stresses and withstands the demands of of Land Rover's, so you can count on long-lasting performance. Fitted compatibility: part number NTC1773 bushing is designed for Land Rover Defender from 1982 to 2009 model year, Discovery 1 (all) and Range Rover classic (all). It ensures an optimal fit and compatibility with your vehicle. Defender from year of manufacture 2009 Replace your old, worn bushing with our high-quality replacement bushing and get your suspension back in top condition. Whether you enjoy off-road adventures or everyday driving, our bushing will provide the stability and control you need. Before purchasing, please check the compatibility of part number NTC1773 with your Land Rover Defender up to 2009 model year, Discovery 1 and Range Rover Classic to ensure it is it is suitable for your vehicle model.

€18.90*

Panhardstabbuchse für Land Rover Defender und Discovery 2

Bushing Panhard bar for Defender & Discovery 2

Bushing Panhard rod several Land Rover models OEM Bushing Panhard Rod Land Rover Defender and Discovery 2 Information Quality: OEM Installed quantity: 2 pieces / vehicle Bolt: M16 Fits for: Defender TD5 2002 > 2006 / Defender TD4 2007 > 2016 and Discovery 2 (all) and Range Rover P38 Defender from chassis number: 2A626646

€17.60*

Sold out

Bushing Thrust Struts Rear Axle Defender & Discovery 1 LR Genuine

Bushing thrust strut rear axle Defender & Discovery 1 Land Rover original suspension bushing suitable for push strut rear axle (axle side). For all Land Rover Defender, Discovery 1 and Range Rover Classic models. Information Installed quantity/vehicle 2 pieces Part quality Land Rover Genuine Fits Land Rover 90-130 (all), Defender (all) Discovery 1 and Range Rover Classic models

€18.89*

Details

Coupling rod Land Rover Discovery

Coupling rod reinforced Land Rover Discovery 3 Reinforced coupling rod for all Land Rover Discovery 3 from Meyle. Chassis, steering and suspension components are exposed to high loads. These often lead to increased wear of moving parts and thus to shorter replacement intervals. To be able to work reliably under these conditions, most of our parts are therefore manufactured in genuine MEYLE-HD quality. This means optimized products with maximum service life and outstanding OE solutions. Information Installed quantity / vehicle 2 pieces Quality OEM Reinforced Suitable for Discovery 3 (all)

€39.90*

Only 2 available

New

Federteller Land Rover

Federteller Land Rover Vorder- &-Hinterachse passend für mehrere Modelle wie:DefenderDiscovery 1Range Rover Classic

€16.90*

Verstärkter Dreieckslenker Discovery 3 und 4 sowie Range Rover Sport

HD wishbone VA left Discovery 3 / 4 and Range Rover Sport

HD wishbone Discovery 3 / 4 and Range Rover Sport front axle right. Reinforced wishbone front axle left down for Land Rover Discovery 3. Steering and suspension components are subject to extremely high loads. This often results in increased wear of the parts and leads to shorter replacement intervals. To be able to work reliably under these conditions, most of our parts are therefore manufactured in genuine MEYLE-HD quality. This means optimized products with maximum service life and outstanding OE solutions. Information Installed quantity / vehicle 1 piece Quality OEM reinforced Suitable for Discovery 3 / Discovery 4 / Range Rover Sport

€315.45*

Dreieckslenker Land Rover Discovery 3 und Discovery 4 sowie Range Rover Sport

HD wishbone VA right Discovery 3 / 4 and Range Rover Sport

HD wishbone Discovery 3 / 4 and Range Rover Sport front axle right. Reinforced wishbone front axle right bottom for Land Rover Discovery 3. Steering and suspension components are subject to extremely high loads, which often leads to increased wear of the parts and shorter replacement intervals. To be able to work reliably under these conditions, most of our parts are therefore manufactured in genuine MEYLE-HD quality. This means optimized products with maximum service life and outstanding OE solutions. Information Installed quantity / vehicle 1 piece Quality OEM reinforced Suitable for Discovery 3 / Discovery 4 / Range Rover Sport

€315.45*

Only 1 available

NTC1888 Kugelegelenk Stabilisator für Defender, Discovery 1 und Range Rover Classic

Land Rover ball joint stabilizer front and rear axle

Stabilizer joint for Land Rover rigid axle vehicles Land Rover Defender, Discovery 1 and Range Rover Classic ball joint for stabilizer front axle and rear axle. Parts quality OEM from Lemförder. Information Installed quantity / vehicle 4 pieces Suitable for Defender (all) Discovery 1 (all) and Range Rover Classic (all) Quality OEM original equipment manufacturer

€39.80*

Land Rover Stoßdämpfer komplett

Land Rover Discovery 1 Stoßdämpfer komplett mit Scheiben und Gummis - Vorderachse Verbaute Menge: 2 Passend für: Land Rover Discovery 1 Qualität: Nachbau Ersatzteil

€30.75*

Nut Nyoloc M20

Nut Self-locking M20 Land Rover chassis InformationQuality OEMPU 10 pieces

Content: 10 Stück (€0.98* / 1 Stück)

€9.80*

OME BP51 Hochleistungs-Stoßdämpfer Land Rover Defender Einstellbar

OME high performance shock absorber BP-51 rear axle Defender

OME high performance shock absorbers rear axle for all Defender. The BP-51 rear axle shock absorbers feature revolutionary technology designed to give your Land Rover unprecedented on-road and off-road performance. The OME BP-51 are adjustable in rebound & compression. They are designed to handle the toughest conditions in the Australian bush. They can be adjusted to suit your Defender to a wide range of requirements and riding characteristics, providing a much more comfortable ride on the road, combined with an exceptional level of control and handling off-road. The rebound and compression damping can be easily adjusted to significantly improve damping performance when loaded, while allowing the ride to be tailored to the driver's needs. Information Vehicle specific applications No adjustments are required. Fit kits designed specifically for the Defender. All bin holders have been integrated into the geometry of the Defender 110/130. Included in the front fit kit are a front shock turret, front sway bar spacers, front bump stops and the reservoir mount. Included in the rear fit kit is a replacement shock mount, rear sway bar spacers, rear bump stops and reservoir bracket. Spring selection must be from current OME Defender long travel application.

€709.00*

Rubber Bearing (Silent Bearing) Tie Rods Defender

Silent Bearing Bushing Frame Side DefenderLand Rover part number ANR6971 refers to the rubber bearing for the front axle tie rod of Land Rover Defender and others, which is manufactured in OEM quality. This rubber mount is specifically designed for Land Rover vehicles, such as Discovery 1 and Range Rover Classic as an original part and provides a reliable and TheANR6971 rubber mount meets Land Rover's high standards and ensures optimum functionality and safety of the vehicle. It is made of robust material that can withstand the withstand the stresses of road and off-road use. The bearing is used to firmly connect the tie rod to the vehicle frame and allows effective transmission of forces and movements.Bushing tie bar frame side Land Rover Defender.Thanks to its OEM quality, the ANR6971 rubber bearing is an exact reproduction of the original part and fits perfectly into the vehicle. It offers a simple and straightforward installation, without the need for adjustments or modifications. With this rubber mount, Land Rover owners can rest assured that they are getting a reliable, high-quality replacement part that will Supports the performance and driving stability of their vehicle.Part Number ANR6971 Suspension Bushings.Whether it's maintenance, repairs, or component replacement, the ANR6971 rubber mount is a trusted choice for Land Rover vehicles. It was developed, to meet the high standards of quality, durability and fit, making it an ideal option for maintaining and preserving the performance of a Land Rover vehicle.

€8.49*

Only 2 available

Gummilager-Satz für NTC1888 Stabilisator Kugelgelenk Land Rover Defender und Discovery 1

Rubber Bearing Ball Joint Stabilizer

Rubber bearing set for stabilizer ball joint Land Rover Rubber bearing set for ball joint suitable for all Land Rover Defender, Discovery 1 and Range Rover Classic in OEM parts quality. Information Installed quantity / vehicle 8 pieces Quality OEM Suitable for Defender (all), Discovery 1 (all), Range Rover Classic (all)

Content: 10 Stück (€0.99* / 1 Stück)

€9.90*

Only 6 available

Schrauben Schubstreben Hinterachse Defender und Discovery 1

Screw

Bolt thrust strut rear axle OEM bolt for push strut (axle side) suitable for Land Rover 90 to 130, Defender and Discovery 1 and Range Rover Classic all models. Information Reproduction quality VPE 5 pieces Installed quantity / vehicle 2 pieces (orderable quantity 1 VPE 5 pieces)

Content: 5 Kilogramm (€1.98* / 1 Kilogramm)

€9.90*

Only 5 available

Bolzen Kugelgelenk Stabilisator Land Rover Defender, Discovery 1 und Range Rover Classic

Screw Kugelegelnek stabilizer Defender, Discovery 1 and Range Rover Classic

Bolt for ball joint stabilizer rigid axle Land Rover Bolt for Land Rover stabilizer ball joint suitable for Land Rover Defender, Discovery, Range Rover Classic. Information Installed quantity / vehicle 4 pieces Suitable for Defender, Discovery 1 and Range Rover Classic Quality OEM

€7.38*

Discovery Suspension Spare Parts

The suspension is one of the heart of a vehicle, especially an off-road vehicle like the Discovery. If you need to perform a repair on your car's suspension or want to improve it by replacing various components, you can always find the right tools and spare parts here in 4X4Ward's online store. For example, we offer suspension from the original manufacturer but also from various other reputable companies that provide good and reliable spare parts. Choose your Discovery suspension spare parts from our range and trust in the best quality. You are preparing for a big tour in the off-road vehicle and want your suspension to be in the best shape? We have the right tools and parts ready for this case as well. The suspension of an off-road vehicle has to withstand a lot as a kind of backbone of the car and therefore only robust and high-quality spare parts are suitable for the Discovery.

Spare parts for the Discovery chassis

We offer a comprehensive selection of various items related to the Land Rover Discovery's suspension. Thereby we have suspension spare parts for the different models of the Discovery models and years of construction in the program. In our assortment you can take a look at the different parts for the rigid axle suspension and compare the individual products as well as prices. Such a stable chassis as that of the Land Rover Discovery should always be equipped and repaired only with high-quality spare parts. Trust our selection of good manufacturers and reliable items, because when you're on a big off-road tour, you can't afford to have parts break or fail prematurely. Even in extreme conditions, tropical or arctic climates, and on uneven to rocky surfaces, your suspension needs to hold up so you can find your way back home safely.

Discovery undercarriage repair with high-quality spare parts

The Discovery's suspension is always under extra stress. So rely on high-quality replacement parts from reputable manufacturers like Land Rover Genuine, Meyle, or Monroe, and only install springs, Panhard bars, shocks, dampers, and suspensions that can stand up to the conditions in the wild. Go for quality when it comes to the stability of your suspension. As your parts specialist online, we can advise you on a specific replacement part. Contact us if you need a tip or are not sure which spare part is the right one in your situation or for your Discovery.