The Land Rover Defender is equipped with an undersized brake system ex works. At a speed of 100km/h to a standstill, a series Land Rover Defender requires a distance of 54m. With the ENGAGE4X4 brake upgrade kit, the braking performance is significantly increased. Land Rover Defender high performance brake system with parts certificate With heavy expedition or work vehicles, the brakes wear out very quickly on mountain passes or in the mountains. The reason for this is the poor heat dissipation of the brake discs, the brake caliper, the material of the brake pads as well as the contact pressure of the brake caliper pistons. The ENGAGE brake discs have a 25mm larger diameter and are 4mm stronger than the original brake discs. Due to the high-quality material (G600), the durability of the disc is significantly higher. The heat dissipation of the ENGAGE4X4 brake discs was thus significantly increased. Brake system for heavy Land Rover Defender and Rally Raid vehicles. The ENGAGE4X4 high-performance brake system was developed especially for heavy vehicles. Particular emphasis was placed on the compact design of the calipers so that it fits under any 16" alloy rim. Another important criterion for the ENGAGE4X4 Defender brake system is the significantly longer service life. The original brake calipers of the Defender are very susceptible to dirt and corrosion of the brake pistons. Sand, water, mud, salt, can easily damage the original caliper pistons - the result is a poorer braking effect. ENGAGE calipers are machined from high-strength aluminum (Fortal 7075 T6) and are equipped with stainless steel brake pistons and dust collars. The calipers are even considered seawater resistant and are used in amphibious vehicles. Tested brake system for Land Rover Defender A better braking effect, depending on the vehicle (weight, tires, surface) of 20 to 26% was tested. As well as a 40% higher load capacity. The braking system of the Land Rover Defender should be adapted to changes in the vehicle, such as additional weight, power increase, roof rack, etc. also to ensure safety in road traffic. Scope of delivery4 high-performance brake calipers front and rear axle4 high-performance brake discs front and rear axle4 adapters1 set of Teflon coated steel braided brake hoses1 TÜV parts certificate Information Off road, rally raid, expedition vehicles, protected vehicles, military vehicles Brake disc dimensions: 325X26 Brake disc material G-600 Manufacturing solid material milled Brake caliper material Alu Fortal 7075 Piston 6 front & rear Dimensions Smaller than OEM caliper on VA Brake Pads: High Performance Sinter Metal Pads

Land Rover Defender TD4 steel braided brake lines with TÜV parts certificate (without ABS) ENGAGE4X4 high performance steel brake lines are Teflon-coated and covered with a protective sleeve for protection in heavy off-road use. The connections to the brake lines and calipers of the original brake system are made of stainless steel. So there are no problems with corrosion. The braking performance is significantly improved. Original brake hoses stretch under pressure by about 10%. With ENGAGE4X4 high performance brake hoses, the diameter remains constant and the brake pressure is passed directly to the caliper. Hose: Steel flex Teflon coated Connections: V2A Protective cover: PPE Application: Off Road, with suspension lift

ENGAGE4X4 Defender steel braided brake lines are Teflon coated and provided with a tough protective cover for protection in heavy off-road use. The connections to the brake lines and calipers of the original brake system are made of stainless steel. So no problems with corrosion arise. Land Rover Defender TD5/TD4 steel braided brake lines with TÜV parts certificate Original Defender brake hoses stretch under pressure by approx. 10%, thereby valuable braking power is lost. With ENGAGE4X4 high performance brake hoses the diameter remains constant and the brake pressure is passed on evenly and constantly directly to the brake caliper. ENGAGE4X4 brake hoses allow more entanglement ENGAGE4X4 brake hoses are 30 mm longer than original brake lines. Therefore, they are preferably used for suspension upgrades. Thus, a Defender chassis with significantly better axle articulation can be mounted. Line: Steel braided teflon coated Connections: V2A Protective cover: PPE Application: Off Road, with suspension lift

EBC Ultimate brake pads for Land Rover Defender & Discovery front axle. The new EBC high performance brake pads are with a revised AF42 / 66 friction material, which completely eliminates brake vibration and creates a long-lasting brake pad with high friction.A high-strength powder coating pad plate back plate ensures long-lasting corrosion resistance and prevents moisture penetration. Land Rover EBC brake pads and sophisticated technology. The special "Brake-In" surface coating provides immediate braking effect after installation and prevents glazing of the brake discs and black spots on disc surface.All EBC brake pads have a centerline slot, this prevents cracking during thermal expansion and also prevents brake noise. The EBC Land Rover high performance brake pads are chamfered on the flanks, these chamfers offer technical advantages in heat generation. At the same time, a significant reduction in brake noise is achieved. It prevents "edge lifting" under the left and right ends of the brake pad, which could lead to corrosion ingress and eventual pad detachment. Information Suitable for Defender , Dicovery 1, Range Rover Classic. The full chassis number contains the correct application. These references are for guidance only.

EBC Ultimate brake pads for Land Rover Defender 110 rear axle without ABS. The new EBC high performance brake pads are made with a revised AF42 / 66 friction material, which completely eliminates brake vibration and creates a durable brake pad with high friction.A high-strength powder coating pad plate back plate ensures long-lasting corrosion resistance and prevents moisture penetration. Land Rover EBC brake pads and sophisticated technology. The special "Brake-In" surface coating provides immediate braking effect after installation and prevents glazing of the brake discs and black spots on disc surface.All EBC brake pads have a centerline slot, this prevents cracking during thermal expansion and also prevents brake noise. The EBC Land Rover high performance brake pads are chamfered on the flanks, these chamfers offer technical advantages in heat generation. At the same time, a significant reduction in brake noise is achieved. It prevents "edge lifting" under the left and right ends of the brake pad, which could lead to corrosion ingress and eventual pad detachment. Information Fits Defender rear axle from 1994 > 2016 (without ABS). The full chassis number contains the correct application. These references are for guidance only.

EBC high performance brake discs VA for all Defender - Discovery 1 and Range Rover Classic. Special high performance brake discs for vehicles with higher load e.g. expedition vehicles, trailer operation or vehicles which have to drive a lot in serpentines and pass roads. Land Rover Performance Brake Disc - Made in England High performance brake discs for high loads, the EBC Performance brake discs are the ideal sport brake discs for off-road applications. The blind drilled discs prevent cracks in the brake disc while ensuring perfect contact with the brake pads. The extra wide brake disc slots are designed to the end of the disc and thus ensure perfect drainage of abrasion, dust and water as well as significantly better cooling compared to original brake discs. Overheating and glazing of the discs in conjunction with EBC Ultimate brake pads are a thing of the past. Defender Performance brake discs are ideal for heavy expedition Defender vehicles that are often on the road in trailer operation. Braking performance is noticeably better when used in conjunction with EBC Ultimate brake pads and Teflon coated steel flex brake lines. An ABE is included in the scope of delivery. Information Lined Peformance brake disc Areas of application Heavy expedition vehicles, trailer operation, vehicles in mountainous regions Suitable for Defender - 1987 - 2016 Also suitable for Discovery 1 and Range Rover Classic - 1986 - 1994 With ABE

EBC high performance brake discs rear axle for Defender 110 & 130. Special high performance brake discs for vehicles with higher loads e.g. expedition vehicles, trailer operation or vehicles which have to drive a lot in serpentines and pass roads. Land Rover Performance Brake Disc - Made in England High performance brake discs for high loads, the EBC Performance brake discs are the ideal sport brake discs for off-road applications. The blind drilled discs prevent cracks in the brake disc while ensuring perfect contact with the brake pads. The extra wide brake disc slots are designed to the end of the disc and thus ensure perfect drainage of abrasion, dust and water as well as significantly better cooling compared to original brake discs. Overheating and glazing of the discs in conjunction with EBC Ultimate brake pads are a thing of the past. Defender Performance brake discs are ideal for heavy expedition Defender vehicles that are often on the road in trailer operation. Braking performance is noticeably better when used in conjunction with EBC Ultimate brake pads and Teflon coated steel flex brake lines. An ABE is included in the scope of delivery. Information Lined Peformance brake disc Areas of application Heavy expedition vehicles, trailer operation, vehicles in mountainous regions Fits Defender 110 & 130 - 1987 - 2016