Defender TD4 2 MICRON fuel filter for original connection. The Land Rover Defender TD4 Common Rail engine is particularly sensitive when it comes to the quality of the fuel. If the dirt particles that get into the injectors are too large, engine damage is inevitable. There is a simple and inexpensive solution from 4WARD4X4 to protect the engine for long distance trips to countries with questionable fuel quality. A suitable 2 micron fuel filter for the Land Rover Defender TD4 2.4 and 2.2 liter engine. Suitable from: Year of manufacture 2007 to 2016

Replacement 2 Micron Fuel Filter for ENGAGE4X4 Fuel Filter Set. The 2 Micron fuel filter is a special fine filter and thus protects the injectors of the Land Rover Defender TD4. Information Fineness 2 Micron (standard Land Rover OE filter) for African countries, large parts of Asia, Russia (Siberia)

Pivot mount A-Frame for rear axle Defender. This exclusive ball joint offers 45° of freedom of movement, significantly improving axle articulation.One of the main factors limiting rear suspension movement on "A-Frame" vehicles is the standard ball joint. We designed this part to provide significantly more articulation than stock and most aftermarket joints. Others claim more articulation but actually offer very little beyond the standard 30 °. This exclusive ball joint offers 45° of movement in all directions. It adjusts easily with a standard hex wrench and includes a grease fitting for convenient periodic maintenance.It comes assembled in the mounting bracket, ready to bolt to your Land Rover.

ENGAGE4X4 adapter plate for Safety Devices cage mounting. The adapter plates are for mounting on the ENGAGE4X4 roof rack and the Safety Devices Hoop-Rail, so you can vary the prositions of the roof rack on the outer cage. At the same time, the adapter plates can be used for mounting antennas, auxiliary lights or other accessories. Information Material S355 Surface black powder coated Made in Germany

Specially designed for vehicles with pneumatic differentials or ARB Air Lockers. The compact and lightweight design with so-called push-in connections facilitates installation. At the four bleed holes can also be connected, for example, gearbox & transfer case. The mounting is done with M6 bolts / screws. The ARB axle breather kit should be mounted in the engine compartment at the highest point. Axle Breather for Land Rover Defender (not vehicle specific) The splash proof air filter is with a washable sintered bronze filter. The high performance oil, water and heat resistant 8 mm polyurethane hoses reduce the likelihood of oil blockages in the axlesScope of delivery 1 x Anodized aluminum manifold 1 x Air filter 1 x 8mm x 8m polyurethane hose 4 x 8mm-1/8 "BSP connectors 3 x 1/8 "BSP connectors 2 x sheet metal screws 10 x cable ties

Fitting for ENGAGE4X4 roof racks and airline rails. The Automotive Fitting is designed to secure loads for vehicles. The fitting for the airline rails is made of plastic, this ensures that there is no unpleasant noise on slopes. Information Made in Germany Tensile load 500 Kn

Ball head with towing jaw for Land Rover AHK. Land Rover ball head with towing jaw combination for various Land Rover trailer devices (AHK). Practical towing eye for safe towing or recovery of vehicles Information RTC8159 / LR008244 All models

Ball head Land Rover 3.5 tons Ball head Land Rover trailer device with 3.5 tons approval Information Defender - all models Discovery 1 Range Rover Classic Discovery 2 Series - all models

Bilstein gas shock absorber B6 for all Defender and Discovery 1 models. The Bilstein B6 series for all Defender and Discovery 1 models, is an ideal gas pressure shock absorber for the standard chassis under increased load. So you can with different tunings to meet various requirements on your Defender or Discovery. The B6 gas damper makes no compromise in performance and comfort. Improved driving characteristics in every situation. Especially for upgraded Land Rover Defender (Discovery 1) is the B6 series in conjunction with original springs suitable whether heavy cargo transports the trailer or bad roads in Moroccan desert. In general, are a challenge for the Bilstein B6 Defender shock absorbers. Ideal improvement for the original Land Rover chassis. B6 shock absorber offers improved series replacement for such high demands. It is achieved with the original springs improved vehicle dynamics for a comfortable ride.

Bolt set Defender suspension front axle for all Land Rover Defender TD5 from VIN XA159807 - 2A620000

Bolt set for suspension mounting Defender front axle. Includes bolts and nut for mounting the Panhard rod and tie rods. Information Defender - LA930456 to WA159806 Range Rover Classic - 1992 - 1994

Screw set rear axle Land Rover Defender from year of manufacture 2009Our pre-assembled bolt set for suspension bushings on the rear axle of the Land Rover Defender, manufactured for vehicles from year of manufacture 2009 to 2016, is the ideal solution for the Maintenance and replacement of the bushings. This high quality bolt set contains all the necessary bolts for precise and reliable installation. Each screw has been carefully selected, to ensure a perfect fit and long life. With this bolt set you can keep your suspension in top condition and enjoy an optimal driving experience. Invest in quality and order our Rear Axle Suspension Bushing Bolt Set today for optimum care and maintenance of your Land Rover Defender.

Bowler Seitenschweller aus Aluminium Diese Schwellerprotektoren werden aus leichtem Aluminium hergestellt und werden in der Defender Challenge eingesetzt. Die Seitenschweller werden mit einem Montagesatz geliefert. Ohne Schweißarbeiten werden sie an den vorhandenen Befestigungspunkte geschraubt. Sie sind kompatibel mit XS-Trittstufen. Informationen Schweller aus Aluminium  Oberfläche eloxiert Anbauteile Stahl pulverbeschichtet  

Bracket for height adjustable trailer hitch Land Rover Defender suitable for LR007221 and LR007222.

Polyurethane Buchsen Kit für Land Rover Defender (TDI, TD5, TD4) Hochbelastbares Upgrade für maximale Haltbarkeit und Performance** Das Polyurethane Buchsen Kit für alle Land Rover Defender Modelle (TDI, TD5 und TD4) ist die ideale Wahl für Fahrer, die Wert auf Langlebigkeit und Stabilität legen. Speziell entwickelt fürhohe Belastungen und extreme Bedingungen, bietet dieses Defender Heavy-Duty Fahrwerks-Buchse-Kit eine deutlich längere Lebensdauer als herkömmliche Gummibuchsen und sorgt für präziseres Handling auf und abseits der Straße.  Warum Polyurethane? Polyurethane zeichnet sich durch außergewöhnliche Festigkeit und Elastizität aus. Im Vergleich zu Standard-Gummibuchsen sind diese Buchsen widerstandsfähiger gegen Verschleiß, Hitze und Chemikalien – perfekt für anspruchsvolle Offroad-Abenteuer und schwere Lasten. Vorteile des Polyurethane Buchsen Kits:Erhöhte Haltbarkeit: Widersteht intensiver Belastung und verlängert die Lebensdauer der Komponenten.Verbesserte Stabilität: Reduziert unerwünschte Bewegungen und sorgt für ein präziseres Lenkgefühl. Widerstandsfähigkeit: Beständig gegen Öl, Fett, UV-Strahlung und extreme Temperaturen. Optimale Performance: Ideal für Defender-Fahrer, die ihr Fahrzeug auf das nächste Level heben möchten.Kompatibilität: Passend für alle Defender Modelle – **TDI, TD5 und TD4Einfache Installation dank präziser Passform und robuster Verarbeitung.  Verfügbar bei 4WARD4X4 – Das Upgrade für maximale Zuverlässigkeit und Kontrolle in jedem Gelände.

Bumper mounting kit with stainless steel screws. Bumper mounting plate kit with impact block and stainless steel screw set. Information Installed quantity / vehicle 1 setMaterial screws V2AIncludes screws, threaded blocks, caps

High performance bushings for tie rods (frame side) for Land Rover Defender Particularly suitable for extreme and permanent loads off-road. The Powerflex high performance bushings have a special shape that allows a much better axle articulation. Technology and construction allow a better axle articulation of the Defender. The special feature of Powerflex bushings is the perfectly matched hardness of each suspension bushing. This makes it possible to achieve significantly safer handling. At the same time, a much better axle articulation can be achieved through the special design.

Land Rover Defender caster correction kit heavy duty. This heavy duty bushing kit from Powerflex PFF32-108G25 is designed for caster correction for all Land Rover Defender with a maximum lift or lowering of 25mm. This kit is suitable for the wider 44mm trailing arms from chassis number LA. If you correct the caster on your vehicle, you can feel a significant improvement overall driving characteristics especiallyin steering . More stability Improved handling and tire grip More weight and better steering response Explanation of caster correction with bushings The kit contains robust CNC machined steel shells to prevent rotation and maintain the corrected geometry. POWERFLEX Performance Diagram for Land Rover Defender caster correction bushings.

Caster correction kit for the Land Rover Defender. The inexpensive alternative to modified trailing arms. The caster is absolutely necessary when raising the chassis.

ENGAGE4X4 Chubby Box Increase Land Rover Defender The ENGAGE4X4 design parking heater console is high quality manufactured and very light. It allows the installation of parking heaters (Webasto, Planar and Eberspächer) or for example the installation of other electronic components such as fuse boxes, music systems, battery management system and much more. Various switches, USB connections and displays for the parking heater can be easily mounted. The elevation of the center console makes it much more comfortable to drive. Thus, the armrest in a much more comfortable position (about 100mm higher). Information

Checker plates for Land Rover Defender fenders Land Rover Defender checker plate supports for the fenders. The fenders can be walked on with the checker plate support. When working on the engine, the original fenders are protected. In black, the plates are powder coated and anodized in nature.

The Land Rover Defender is used in many ways off-road and especially on long-distance trips. Often an access to the roof is necessary, this offers itself over the hood. The 2-piece checker plate kit from 4WARD4X4 is 3 mm thick and is available in black powder coated or silver anodized. Information Material aluminum Thickness 3 mm Surface powder

Chequer plate Land Rover Defender Protective cover made of checker plate is a useful and visually appealing accessory for the Land Rover Defender. It was one of the first accessories parts for the Land Rover Defender. It makes the hood walkable, allowing easy access to the roof rack of the Land Rover Defender. Checker plate support for the hood in premium quality for all Land Rover Defender TD,TDI and TD5 models up to MY 2007. Does not fit Land Rover Defender TD4 Incl. mounting material

Closure plug for cigarette lighter socket. Information Installed quantity / vehicle Different Material plastic Suitable for Defender; Discovery 2 to 4; Freelander 2 and Range Rover all