Filter set for Discovery 1 & Range Rover TDI 300

Additive Land Rover Diesel Engines - Mathy-M Engine Additives Why dump an engine additive into your Land Rover diesel engines? When today's oils are soo good? This is partly true, in the lubricant industry a lot has been done, there are quite good engine oils and about a good engine oil you can achieve a lot and extend life time of the engine significantly. But it can be done better, especially with vehicles that are sometimes left standing for a long time and you don't know exactly which oil is used. Also important are regular internal cleaning of the engine and the addition of an additive. Additives are specially designed oils so prepared to increase the temperature performance of the engine oils, that is, in plain language, the continuous load of an oil until the lubricating film tears, to minimize deposits, to better maintain seals (especially oil seals and rubber seal) to prevent oil leaks. In short, to keep the engine and the oil borings clean and to provide better lubrication. Engine additives recommended for expedition vehicles on long-distance trips. 4WARD4X4 Maintenance has tested MATHY-M for a long time and is convinced, the long experience of the manufacturer is legendary. Mathy-M is a high performance engine oil additive developed and manufactured according to the latest technology. No solid lubricants were used and it serves to increase the performance of all engine oils based on mineral oil, semi-synthetic and fully synthetic basis of SAE classes 0 to 60. Areas of application engines of all types (gasoline, diesel, Wankel and gas engines) to high fuel consumption in case of high loads and high wear in case of too loud and unsteady running as well as vibrations can also be used with AdBlue Dosage 10% of the total oil quantity for normal use of the vehicle 20% of the total oil quantity for sport purposes, high loads, trailer operation, motorcycles, turbo or compressor engines