ENGAGE4X4 double cardan shaft Land Rover Defender for suspension raising

Name: ENGAGE4X4 double cardan shaft Land Rover Defender for suspension raising
Brand: ENGAGE4X4
SKU: EN-1LR665HD
Price: 1099.0 EUR
Availability: OutOfStock

ENGAGE4X4 bietet hochwertige Doppelgelenk-Kardanwellen speziell für höhergelegte Land Rover Defender an, um diese Dauerhaltbare zu machen und lästige Vibrationen aus dem Antriebsstrang zu entfernen. Diese Kardanwellen sind so konstruiert, dass sie optimale Leistung und Haltbarkeit bieten und eine reibungslose Kraftübertragung auch unter anspruchsvollen Offroad-Bedingungen gewährleisten. Mit den Doppelgelenk-Kardanwellen von ENGAGE4X4 können Sie den Antriebsstrang Ihres höhergelegten Land Rover Defenders verbessern und Ihre Offroad-Abenteuer auf ein neues Level bringen.

€1,099.00*

Content: 1 Stück

Prices incl. VAT plus shipping costs

Available in 3 days, delivery time 2-6 Tage

Vehicle version

Defender (VA) TD4 all / Defender 90 (HA) TDI/TD5 (LC 680mm)

Defender (VA) TDI/TD5 all / Defender 90 (HA) TD4 (LC 610mm)

Stück

Product number: EN-1LR665HD

Product information "ENGAGE4X4 double cardan shaft Land Rover Defender for suspension raising"

Double-joint propshaft Land Rover Defender

When the chassis is raised more than 25 mm, rotational vibrations occur in the driveline of the Defender TD4. These mostly occur in the, at a speed of slightly more than 80 km/h and can damage the transfer case in the long run. The ENGAGE4X4 double-joint propshaft prevents the vibrations in the driveline of the raised Defender through a stress-free working angle. In this way, height increases of around 100 mm are possible. Thus, the ENGAGE4X4 double-joint propshaft is absolutely necessary for Land Rover Defenders with a suspension lift, in order to carry out a durable suspension modification on the Defender. Another special feature is the new lubricatable sliding piece developed by ENGAGE4X4, here the grease nipple is protected, so that the shaft can be maintained even after extreme off-road use.

Continuous improvement and long-term testing in our vehicles.

In 2018, a journey was started from Germany to Mongolia and back around 20,000 km, including 3,500 km under the most adverse conditions in the steppe of Mongolia and many off-road passages in Russia and Kazakhstan. The ENGAGE4X4 double-jointed cardan shaft had been installed for more than 6 years at this point and had run 45,000 km with a suspension increase of 80 mm. Also on this tour no defect was found at the shaft. Our ENGAGE4X4 double-joint cardan shaft has gone through a steady improvement trip over 9 years. Countless improvements, tests with the manufacturer and durability tests as well as long-term tests over years have made this propshaft unique.

Available for all Land Rover models

For the Land Rover Defender suitable for the front axle and the Defender 90 TDI & TD5 suitable for the rear axle. The ENGAGE4X4 propshafts are designed for very heavy duty off road use. The sliding piece of this Defender propshaft is protected with a Simmering against the penetration of dirty water. The reinforced universal joints can be lubricated. The shaft operates stress-free at large interlocks at angles up to 35°.

Information

Land Rover Defender TD4 (all models) on the front axle
Land Rover Defender 90 TD5 & TDI on rear axle
Cross sets: Reinforced 30mm (greasable)
Length compensation: 110mm
Sliding piece: Toothing plastic coated and sealed with Simmering (greasable)
Flange: Fits flange (original Defender flange)
Manufacturer Standard: ISO:9001 & TS:16949

Applications
Off Road, Trophy, Rally Raid, protected vehicles, higher mounted vehicles, expedition vehicles for long distance travel

Ähnliche Produkte

Bolt set cardan shaft rear axle

Mounting kit for Land Rover propshaft rear axle. No need to search for spare part numbers, just order a preassembled mounting kit. You want to replace the propshaft or universal joints. Just order a ready made repair kit and save valuable time. Information: 4 x 509045P - Bolt Differential Side4 x FRC3602 - UNF fBolt Handbrake Drum8 x NZ606041L - Fuse Nyloc Nut Fits for: Defender (all models)

€9.90*

Only 1 available

ENGAGE4X4 Hochleistungs-Weiwinkelkardanwelle Land Rover Defender

Wide angle propshaft ENGAGAE4X4 for Defender wide angle propshaft reinforced

ENGAGE4X4 Wide Angle Cardan Shaft Defender Cardan shafts from ENGAGE4X4 are made in Germany and are only manufactured with OE parts to ensure long durability. All cardan shafts have been tested, developed and continuously improved by us over many years. The universal joints are much stronger than the original standard joints. ENGAGE4 Wide Angle Cardan Shaft Defender for high durability in off-road conditions The ENGAGE4X4 cardan shafts are designed for very heavy loads in off-road operation. The sliding piece of this Defender propshaft is protected from the ingress of dirty water by a Simmering. The reinforced universal joints are equipped with special PU thrust washers (high performance seal) according to construction machinery standard. The universal joints can be lubricated centrally. The shaft operates stress-free at a large entanglement at an angle of up to 30°. ENGAGE4X4 wide angle cardan shafts are of great advantage on Defenders with a low chassis lift max. 20 mm and a higher axle articulation. Thus, the universal joints are not overstressed in the deflected state. The sliding piece with over 110 mm length compensation can be lubricated on all shafts since 2014. The grease nipple is protected from tearing off by a metal ring. So that the shaft can still be maintained even after extreme off-road use. Information Areas of application, off road, trophy, rally raid, protected vehicles, higher vehicles Cross sets reinforced 30 mm with PU thrust washers (greasable) Length compensation 110mm Sliding piece toothing plastic coated and sealed with Simmering (greasable) Fits original Defender flange Manufacturer Standard: ISO:9001 & TS:16949

€779.00*

Details

Bolt set propshaft Defender front axle

Screw set for Land Rover cardan shaft front axle No tiresome searching of spare part numbers, simply order a preassembled assembly set. You want to replace the cardan shaft or universal joints. Just order a ready-made repair kit and save valuable time. Information: 8 x 509045P - Bolt differential side4 x BT606101L - UNF fBolt handbrake drum8 x NZ606041L - Fuse Nyloc nut. Fits for: Defender (all models)Discovery 1 (all)Range Rover classic (all)

€9.90*

Zubehör

Schrauben-Satz Kardanwelle Land Rover Defender

Bolt set propshaft Land Rover

Bolt Set Land Rover Cardan Shaft Each set includes - 4 nuts - for distributor box end & 4 nuts & bolts - for differential flange (differential side). Ideal as a travel repair kit for field assembly. Fits for:Defender; Discovery 1; Range Rover Classic

€6.90*

Only 1 available

Land Rover Defender Hochleistungs-Fahrwerk-Step 1

Land Rover Defender 110 and 130 ENGAGE4X4 complete suspension kit Expedition Step 1

Land Rover Defender suspension with TÜV parts certificate If the Defender 90 is raised by longer suspension springs, the front axle shifts to the left, short um -the correct fit of the front axle is no longer guaranteed. This is where the adjustable ENGAGE4X4 Panhard bar (with TÜV parts certificate) comes into play. Further the deflection angles of the front and rear cardan shafts change, so the annoying vibrations in the drivetrain arise, these are installed by the assembly of ENGAGE4X4 pull & push rods (with TÜV parts certificate) to correct the caster front & rear axle. Since this measure is not sufficient for the Land Rover Defender when the chassis is raised, additional reinforced double-jointed cardan shafts are installed to prevent the load on the universal joints and the load on the transfer case. High quality Defender accessories from Germany ENGAGE4X4 complete suspensions are completely TÜV tested and allow a height increase of 30 to 65mm depending on vehicle weight and characteristics. The ENGAGE4X4 "Expedition" suspension kit for the Defender allows a completely legal installation within the range of the STVZO. All with supplied TÜV relevant components are delivered with a TÜV parts certificate. The Expedition complete suspension kit for the Land Rover Defender is available in 3 variants as follows. The Step 1 Kit is supplied with fully demountable and reinforced high performance shock absorbers without balance reservoir. The Step 2 kit is supplied with fully demountable and reinforced high performance shock absorbers with reservoir. The Step 3 kit is supplied with fully demountable and reinforced high-performance shock absorbers with compensation reservoir and 40-fold adjustable compression damping. The different applications of each complete suspension for the Land Rover Defender are explained as follows. Expedition complete suspension Step 1 Occasional trips in Europe to heavy off-road and work use also suitable for higher roof loads. ENGAGE4X4 suspension springs for Defender 90 Progressive suspension springs with coil cut-off on the front axle. Allow so your Defender a 25% articulation of the front axle and thus a better entanglement compared to other chassis. The springs on the front axle ensure perfect suspension tuning. Both front axle springs have been calculated with different wire thicknesses to the respective weight.The rear axle springs are designed to accommodate higher payloads, the slightly progressive articulation of the rear axle springs allow despite everything a much more comfortable ride with your Land Rover. ENGAGE4X4 high performance shock absorbers An ideal suspension setup for an off-road vehicle is "soft-feathered - hard-damped" That's exactly what we've implemented. The ENGAGE4X4 high-performance shock absorbers are based on a monotube damper system and are designed for the highest loads. The high-pressure gas filling acts against premature cavitation (foaming of the shock absorber oil) under high loads. em and are designed for the highest loads. The high-pressure gas filling prevents premature cavitation (foaming of the shock absorber oil) under high loads.

€7,399.00*