Skip to main content
Free shipping
Shipping within 24h
30 days money back guarantee
Purchase comfortable on account
Hotline +49(0)7223-800130-0

Defender brake caliper front right (without ventilated brake discs)

Product information "Defender brake caliper front right (without ventilated brake discs)"

Brake caliper Land Rover Defender front right side for not lined brake discs.

OEM brake caliper for Land Rover Defender front right side without lined brake discs. Fits all models from chassis number from > (V) 6A713928 Defender TD5 & TD4 models

Information

  • Installed quantity / vehicle 1 piece
  • Quality OEM (AP)
  • Fits Defender from chassis number (V) 6A713928 without ventilated brake discs on the front axle.
Properties "Defender brake caliper front right (without ventilated brake discs)"
Axle code: not listed
Axles: Rover axle , Rover axle P38
Chassis no.: (V)6A713928>
Gearbox: MT82 TD4, R380 TD5
Quality: OEM
Transfer case: LT230, LT230T
Vehicle selection: Defender

Ähnliche Artikel

Only 2 available
Brake caliper Defender Land Rover front axle right
Brake caliper front axle Land Rover Defender with ventilated brake discs. Brake caliper for Land Rover Defender (AP original equipment quality)- without pads. 4 piston brake caliper for the front axle right side. Information Installed quantity / vehicle 1 piece suitable for all Defender from chassis no. (V) 6A713928 with ventilated brake discs OEM quality Pads are not included

€409.00*
Defender 110 and 130 brake pads rear axle
Brake pads Land Rover Defender 110 and 130 rear axle Land Rover Defender 110 and 130 rear brake pads in original equipment quality from Federal Mogul (OEM) with mounting kit Information Installed quantity / vehicle 1 set Original equipment quality (OEM) With mounting kit Old part number SFP000160

€62.90*
ENGAGE4X4 Steel Braided Brake Hoses for Land Rover Defender TD4 without ABS
Land Rover Defender TD4 steel braided brake lines with TÜV parts certificate (without ABS) ENGAGE4X4 high performance steel brake lines are Teflon-coated and covered with a protective sleeve for protection in heavy off-road use. The connections to the brake lines and calipers of the original brake system are made of stainless steel. So there are no problems with corrosion. The braking performance is significantly improved. Original brake hoses stretch under pressure by about 10%. With ENGAGE4X4 high performance brake hoses, the diameter remains constant and the brake pressure is passed directly to the caliper. Hose: Steel flex Teflon coated Connections: V2A Protective cover: PPE Application: Off Road, with suspension lift

€169.00*
Only 1 available
ENGAGE4X4 High Performance Brake System Defender
The Land Rover Defender is equipped with an undersized brake system ex works. At a speed of 100km/h to a standstill, a series Land Rover Defender requires a distance of 54m. With the ENGAGE4X4 brake upgrade kit, the braking performance is significantly increased. Land Rover Defender high performance brake system with parts certificate With heavy expedition or work vehicles, the brakes wear out very quickly on mountain passes or in the mountains. The reason for this is the poor heat dissipation of the brake discs, the brake caliper, the material of the brake pads as well as the contact pressure of the brake caliper pistons. The ENGAGE brake discs have a 25mm larger diameter and are 4mm stronger than the original brake discs. Due to the high-quality material (G600), the durability of the disc is significantly higher. The heat dissipation of the ENGAGE4X4 brake discs was thus significantly increased. Brake system for heavy Land Rover Defender and Rally Raid vehicles. The ENGAGE4X4 high-performance brake system was developed especially for heavy vehicles. Particular emphasis was placed on the compact design of the calipers so that it fits under any 16" alloy rim. Another important criterion for the ENGAGE4X4 Defender brake system is the significantly longer service life. The original brake calipers of the Defender are very susceptible to dirt and corrosion of the brake pistons. Sand, water, mud, salt, can easily damage the original caliper pistons - the result is a poorer braking effect. ENGAGE calipers are machined from high-strength aluminum (Fortal 7075 T6) and are equipped with stainless steel brake pistons and dust collars. The calipers are even considered seawater resistant and are used in amphibious vehicles. Tested brake system for Land Rover Defender A better braking effect, depending on the vehicle (weight, tires, surface) of 20 to 26% was tested. As well as a 40% higher load capacity. The braking system of the Land Rover Defender should be adapted to changes in the vehicle, such as additional weight, power increase, roof rack, etc. also to ensure safety in road traffic. Scope of delivery4 high-performance brake calipers front and rear axle4 high-performance brake discs front and rear axle4 adapters1 set of Teflon coated steel braided brake hoses1 TÜV parts certificate Information Off road, rally raid, expedition vehicles, protected vehicles, military vehicles Brake disc dimensions: 325X26 Brake disc material G-600 Manufacturing solid material milled Brake caliper material Alu Fortal 7075 Piston 6 front & rear Dimensions Smaller than OEM caliper on VA Brake Pads: High Performance Sinter Metal Pads

€7,990.00*
Brake caliper Defender Land Rover front axle left
Brake caliper front axle Land Rover Defender with ventilated brake discs. Brake caliper for Land Rover Defender (AP original equipment quality)- without pads. 4 piston brake caliper for the front axle left side. Information Installed quantity 1 suitable for all Defender from chassis no. (V) 6A713928 with ventilated brake discs OEM quality Pads are not included

€409.00*

Zubehör Artikel

Only 2 available
Brake caliper Defender front left (without ventilated brake discs)
Brake caliper Land Rover Defender front axle left side for vehicles with non-vented discs. Brake caliper for Land Rover Defender without vented brake discs front axle left side in OEM parts quality. Fits all models from chassis number from > (V) 6A713928 Defender TD5 & TD4 models Information Installed quantity / vehicle 1 piece Quality OEM (AP) Fits Defender from chassis number (V) 6A713928 without ventilated brake discs on the front axle.

€399.00*
Brake pads Defender front axle all models
Brake pads Defender all models Defender brake pads (Ferodo) suitable for all models front axle from year of manufacture 1989 to 2016 Quality: OEMSuitable: 1989 - 2016

€62.50*
Land Rover Genuine brake pads for Defender front axle (all)
Land Rover Defender Brake Pads for Front Axle (all models) Original Land Rover Genuine brake pads for all Defender front axle, included is the mounting material like the pins with springs. Information Installed quantity / vehicle 1 set Quality Land Rover Genuine Suitable for Defender all models

€164.40*
Brake caliper screw
Brake caliper bolt for Land Rover Defender Brake caliper bolt front axle for Land Rover Defender from VIN LA930456 to year end 2016 M12 X 35 mm Information Installed quantity / vehicle 4 pieces (quantity to be ordered 1x VPE) Quality original equipment manufacturer (OEM) Price per piece (On the picture are 5 to see)

€2.50*
High performance brake pads
EBC Ultimate brake pads for Land Rover Defender & Discovery front axle. The new EBC high performance brake pads are with a revised AF42 / 66 friction material, which completely eliminates brake vibration and creates a long-lasting brake pad with high friction.A high-strength powder coating pad plate back plate ensures long-lasting corrosion resistance and prevents moisture penetration. Land Rover EBC brake pads and sophisticated technology. The special "Brake-In" surface coating provides immediate braking effect after installation and prevents glazing of the brake discs and black spots on disc surface.All EBC brake pads have a centerline slot, this prevents cracking during thermal expansion and also prevents brake noise. The EBC Land Rover high performance brake pads are chamfered on the flanks, these chamfers offer technical advantages in heat generation. At the same time, a significant reduction in brake noise is achieved. It prevents "edge lifting" under the left and right ends of the brake pad, which could lead to corrosion ingress and eventual pad detachment. Information Suitable for Defender , Dicovery 1, Range Rover Classic. The full chassis number contains the correct application. These references are for guidance only.

€119.50*