Damper dome for Defender height adjustable

Name: Damper dome for Defender height adjustable
Brand: ENGAGE4X4
SKU: EN-6LR008H
Price: 399.0 EUR
Availability: InStock

Dämpferdome Defender Höhenverstellbar mit TÜV

€399.00*

Content: 2 Paar (€199.50* / 1 Paar)

Prices incl. VAT plus shipping costs

Available, delivery time: 1-8 Tage

Paar

Product number: EN-6LR008H

Product information "Damper dome for Defender height adjustable"

The height-adjustable ENGAGE4X4 shock domes for the Land Rover Defender front axle allow, for example, the installation of higher springs in conjunction with shock absorbers in original length or vice versa. There is also the possibility to improve the axle articulation on the front axle, especially with progressive springs with coil-off on the front axle.

ENGAGE4X4 quality suspension for Land Rover Defender

Fully manufactured in the EU, these ENGAGE4X4 height adjustable shock domes for the Defender can be raised to various heights from 50mm to 100mm lowered. This allows to find the right compromise between articulation and spring preload for any suspension / shock combination. The damper domes are made of 6 mm thick high-strength steel (S355), welded using TIG technology, galvanized and coated with polyester powder. The damper domes are particularly resistant to chemicals and weathering. They are also scratch and abrasion resistant.

Indispensable when the driving range has to be changed quickly or when the shock absorbers have to be replaced. The actual amount of suspension travel required is not known or cannot be determined. It is possible to install shock absorbers longer than the original ones, even if the standard springs or shock absorbers are longer than the actual upward travel of the springs, without losing compression or spring preload or, on the contrary, to install shock absorbers shorter than the spring height without losing travel. The right compromise between the two extremes!

Made in EU
Material S355 high tensile steel
Surface EPS powder coating
Height adjustable

Passende Produkte

Only 1 available

ENGAGE4X4 Feder-Cones für Land Rover Defender 90 und Discovery 1

ENGAGE4X4 spring guide cones Defender 90 rear axle

ENGAGE4X4 Spring Cones on Polyurethane for Defender This pair of spring guide cones for the Land Rover Defender 90 or Discovery 1 is entirely made in the EU. To achieve a longer suspension travel the cones for the Defender are indispensable to bring the rear springs back to the original position. Especially if longer shock absorbers or lowered shock absorber Aufnhamen are used. This is an easy and inexpensive way to increase the mobility of the axle suspension. The off-road capability improves many times over. The ENGAGE4X4 spring cones are made of HDPE polyethylene. It improves the sliding ability and avoids annoying noise during the movement. The Defender Spring Cones are CNC lathe perfectly shaped to provide maximum resistance with minimum mass.

Content: 2 Stück (€144.50* / 1 Stück)

€289.00*

Feder-Cones Polyurethane Land Rover Defender Vorderachse

Spring guide cones Defender front axle (all) from ENGAGE4X4

ENGAGE4X4 Polyurethane spring cones for Defender front axle. This pair of spring guide cones for the Land Rover Defender front axle is made entirely in the EU. To achieve a longer suspension travel, the cones are essential for the Defender to bring the front springs back to the original position. Especially if longer shock absorbers are used. This is an easy and inexpensive way to increase the mobility of the front axle suspension. The off-road capability improves many times over. The ENGAGE4X4 spring cones are made of HDPE polyethylene. It improves the glide and avoids annoying noise during the movement. The Defender Spring Cones are CNC lathe perfectly shaped to provide maximum resistance with minimum mass.

Content: 2 Stück (€149.50* / 1 Stück)

€299.00*

Only 3 available

ENGAGE4X4 Feder-Cones für Land Rover Defender 90 und Defender 130

ENGAGE4X4 spring guide cones Defender 110 / 130 rear axle

ENGAGE4X4 Spring Cones on Polyurethane for Defender This pair of spring guide cones for the Land Rover Defender 110 or the Defender 130, is entirely made in the EU. To achieve a longer suspension travel, the cones for the Defender are indispensable to bring the rear springs back to the original position. Especially if longer shock absorbers or lowered shock absorber Aufnhamen are used. This is an easy and inexpensive way to increase the mobility of the axle suspension. The off-road capability improves many times over. The ENGAGE4X4 spring cones are made of HDPE polyethylene. It improves the sliding ability and avoids annoying noise during the movement. The Defender Spring Cones are CNC lathe perfectly shaped to provide maximum resistance with minimum mass.

Content: 2 Stück (€149.50* / 1 Stück)

€299.00*

Sonstige Produkte

Only 3 available

Panhard rod adjustable for Land Rover Defender with TÜV parts certificate

ENGAGE4X4 Panhard bar adjustable for the Land Rover Defender and Discovery with TÜV parts certificate. With 4 springs and 4 shock absorbers a suspension upgrade on the Land Rover Defender is far from done. Most suppliers sell suspension springs and shock absorbers with TÜV.However, what about suspension geometry? When the vehicle height on the Defender is changed due to a set of springs, the front axle shifts to the left. The wheels of the rear axle run quasi offset to the rear axle. As a result, the load on the suspension bushings and other suspension parts changes and may wear out sooner. At the same time, the vehicle pulls to the right when braking. Advantages of the adjustable ENGAGE4X4 Panhard bar TÜV parts certificate > for easy registration Fine thread > for exact adjustment EPS powder coating and blue galvanized thread > for best corrosion protection Made in Germany > for consistent quality Information Material: High performance steel tube S355 Thread: Fine thread Coating: EPS powder coating Thread coating: Blue zinc plated Please note the bushings are not included. For use in Discovery 1 and Range Rover Classic mounting points must be adjusted to M16 or Matching bushings with M14 bolt diameter.

€819.00*

Reinforced struts rear axle for Land Rover Defender with TÜV

Reinforced struts for Land Rover Defender with parts certificate With chassis modification on the Land Rover Defender, the rear thrust struts must also be adjusted. Due to the raising by suspension springs it pulls the rear axle to the center of the vehicle and is no longer in the original position. As a result, the dynamic loads on the suspension bushings are much higher than in the original condition, and thus the durability is significantly reduced. ENGAGE4X4 high performance push rods Land Rover Defender and Discovery with TÜV parts certificate ENGAGE4X4 push rods can be adjusted exactly with washers and so the rear axle of the Land Rover Defender can be brought into original position. ENGAGE4X4 trailing arms are manufactured in Germany and have been tested under extreme conditions on expeditions and off-road operations. Material: Cold drawn precision steel tube S355Coating: EPS powder coatingTested: TÜV parts certificate and durability test 1 year. Recommendation: Please use only original suspension bushings

€739.00*

Discovery 2 Zugstreben 3° Nachlaufkorrektur

ENGAGE4X4 tie rod caster correction for Discovery 2

Land Rover Discovery traction bars for caster correction When raising the Land Rover Discovery 2, you should also adjust the caster of the front axle. With the ENGAGE4X4 correction struts the handling improves significantly. If you lift a vehicle with a rigid axle, the axle shifts to the left and at the same time the caster changes. This leads to a very unsteady driving behavior, the car is no longer true to track and pulls to the right when braking. In this case, the Panhard rod should also be adjusted. If the caster of the front axle changes considerably, it can come so-called "Death Whobble", this means an uncontrollable rocking/trembling of the front axle, at a certain speed, as well as an impulse (unevenness) from the road on a wheel. Information Heat treated Shot peened Zinc primed Powder coated

€729.00*

Damper dome reinforced for Land Rover Defender with TÜV

When installing high-performance shock absorbers with an expansion tank, a different shock absorber mount is required on the front axle. The installation is carried out in the course of a chassis raising. Reinforced Land Rover Discovery 1 shock absorber domes for the installation of expansion tanks The original sheet metal mounts are replaced by massive ENGAGE4X4 damper domes with TÜV parts certificate. Reinforced shock domes from ENGAGE4X4 for mounting for shock absorbers with expansion reservoirs. Material: S355 steel high strength Surface: EPS powder coating RAL 7005 Suitable for: Range Rover Classic & Discovery 1

€389.00*