Product information "Brake pads rear axle Defender 110 / 130"
Brake pads for Land Rover Defender 110 and 130 rear axle
Ferodo brake pads with assembly set for Land Rover Defender 110 and 130 rear axle. Suitable for vehicles from 2002 > 2007 (TD5) only with ABS and Defender 110 and 130 TD4 from 2007 for vehicles with and without ABS.
EBC high performance brake discs rear axle for Defender 110 & 130.
Special high performance brake discs for vehicles with higher loads e.g. expedition vehicles, trailer operation or vehicles which have to drive a lot in serpentines and pass roads.
Land Rover Performance Brake Disc - Made in England
High performance brake discs for high loads, the EBC Performance brake discs are the ideal sport brake discs for off-road applications. The blind drilled discs prevent cracks in the brake disc while ensuring perfect contact with the brake pads. The extra wide brake disc slots are designed to the end of the disc and thus ensure perfect drainage of abrasion, dust and water as well as significantly better cooling compared to original brake discs. Overheating and glazing of the discs in conjunction with EBC Ultimate brake pads are a thing of the past. Defender Performance brake discs are ideal for heavy expedition Defender vehicles that are often on the road in trailer operation.
Braking performance is noticeably better when used in conjunction with EBC Ultimate brake pads and Teflon coated steel flex brake lines. An ABE is included in the scope of delivery.
Information
Lined Peformance brake disc
Areas of application Heavy expedition vehicles, trailer operation, vehicles in mountainous regions
Fits Defender 110 & 130 - 1987 - 2016
Brake cleaner can 500 ml
Förch Brake Cleaner R511 ECO acetone-free and thus complies with current specifications. The brake cleaner is suitable for quick cleaning of disc brakes, brake drums, brake pads and brake blocks as well as clutch parts.
Information
R511 ECO acetone-free
Defender 110 / 130 Brake Pads Rear Axle Reproduction.
These brake pads for all Defender 110 & 130 have been manufactured to TS16949 and ISO14021.They contain an asbestos, lead & CR6 free material. The XD brake pads meet all official quality and safety regulations and conform to European ECE R90.All XD brake pads are manufactured with an underlay material that dampens vibration to prevent noise and reduce heat transfer to the brake fluid. A brake pad with a good price-performance ratio. XD brake pads are manufactured to exacting tolerances using only the best European friction materials to OEM specifications, ensuring long life and low noise levels.
Information
Installed quantity / vehicles 1 set
Quality replica not recommended for vehicle which are in working off-road use
Suitable for Defender 110 and 130 TD5 models (ABS only) from chassis number (V) 2A622424
Fits Land Rover Defender 110 and 130 TD4 models (with & without ABS) all vehicles
Land Rover Defender TD4 steel braided brake lines with TÜV parts certificate (without ABS)
ENGAGE4X4 high performance steel brake lines are Teflon-coated and covered with a protective sleeve for protection in heavy off-road use. The connections to the brake lines and calipers of the original brake system are made of stainless steel. So there are no problems with corrosion. The braking performance is significantly improved. Original brake hoses stretch under pressure by about 10%. With ENGAGE4X4 high performance brake hoses, the diameter remains constant and the brake pressure is passed directly to the caliper.
Hose: Steel flex Teflon coated
Connections: V2A
Protective cover: PPE
Application: Off Road, with suspension lift
EBC high performance brake discs VA for all Defender - Discovery 1 and Range Rover Classic.
Special high performance brake discs for vehicles with higher load e.g. expedition vehicles, trailer operation or vehicles which have to drive a lot in serpentines and pass roads.
Land Rover Performance Brake Disc - Made in England
High performance brake discs for high loads, the EBC Performance brake discs are the ideal sport brake discs for off-road applications. The blind drilled discs prevent cracks in the brake disc while ensuring perfect contact with the brake pads. The extra wide brake disc slots are designed to the end of the disc and thus ensure perfect drainage of abrasion, dust and water as well as significantly better cooling compared to original brake discs. Overheating and glazing of the discs in conjunction with EBC Ultimate brake pads are a thing of the past. Defender Performance brake discs are ideal for heavy expedition Defender vehicles that are often on the road in trailer operation.
Braking performance is noticeably better when used in conjunction with EBC Ultimate brake pads and Teflon coated steel flex brake lines. An ABE is included in the scope of delivery.
Information
Lined Peformance brake disc
Areas of application Heavy expedition vehicles, trailer operation, vehicles in mountainous regions
Suitable for Defender - 1987 - 2016
Also suitable for Discovery 1 and Range Rover Classic - 1986 - 1994
With ABE
EBC Ultimate brake pads for Land Rover Defender 110 rear axle without ABS.
The new EBC high performance brake pads are made with a revised AF42 / 66 friction material, which completely eliminates brake vibration and creates a durable brake pad with high friction.A high-strength powder coating pad plate back plate ensures long-lasting corrosion resistance and prevents moisture penetration.
Land Rover EBC brake pads and sophisticated technology.
The special "Brake-In" surface coating provides immediate braking effect after installation and prevents glazing of the brake discs and black spots on disc surface.All EBC brake pads have a centerline slot, this prevents cracking during thermal expansion and also prevents brake noise. The EBC Land Rover high performance brake pads are chamfered on the flanks, these chamfers offer technical advantages in heat generation. At the same time, a significant reduction in brake noise is achieved. It prevents "edge lifting" under the left and right ends of the brake pad, which could lead to corrosion ingress and eventual pad detachment.
Information
Fits Defender rear axle from 1994 > 2016 (without ABS).
The full chassis number contains the correct application. These references are for guidance only.
Land Rover Defender Brake Pads for Front Axle (all models)
Original Land Rover Genuine brake pads for all Defender front axle, included is the mounting material like the pins with springs.
Information
Installed quantity / vehicle 1 set
Quality Land Rover Genuine
Suitable for Defender all models
Brake pads Defender all models
Defender brake pads (Ferodo) suitable for all models front axle from year of manufacture 1989 to 2016
Quality: OEMSuitable: 1989 - 2016
Land Rover Genuine Brake Pads Defender 110 as well as 130 Rear Axle
Genuine Land Rover brake pads with part number SFP000250 including mounting kit and squeal plates, suitable for all Land Rover Defender 110 and 130 models from 2002 onwards. For TD5 models only with ABS and for TD4 models all Defender 110 / 130s with and without anti-lock brakes.
Information
Installed quantity / vehicle 1 set
Quality Genuine Land Rover original spare parts
Suitable for Defender 110 and 130 TD5 models (ABS only) from chassis number (V) 2A622424
Fits Land Rover Defender 110 as well as 130 TD4 models (with & without ABS) all vehicles
ENGAGE4X4 Defender steel braided brake lines are Teflon coated and provided with a tough protective cover for protection in heavy off-road use. The connections to the brake lines and calipers of the original brake system are made of stainless steel. So no problems with corrosion arise.
Land Rover Defender TD5/TD4 steel braided brake lines with TÜV parts certificate
Original Defender brake hoses stretch under pressure by approx. 10%, thereby valuable braking power is lost. With ENGAGE4X4 high performance brake hoses the diameter remains constant and the brake pressure is passed on evenly and constantly directly to the brake caliper.
ENGAGE4X4 brake hoses allow more entanglement
ENGAGE4X4 brake hoses are 30 mm longer than original brake lines. Therefore, they are preferably used for suspension upgrades. Thus, a Defender chassis with significantly better axle articulation can be mounted.
Line: Steel braided teflon coated
Connections: V2A
Protective cover: PPE
Application: Off Road, with suspension lift
EBC Ultimate brake pads for Land Rover Defender & Discovery front axle.
The new EBC high performance brake pads are with a revised AF42 / 66 friction material, which completely eliminates brake vibration and creates a long-lasting brake pad with high friction.A high-strength powder coating pad plate back plate ensures long-lasting corrosion resistance and prevents moisture penetration.
Land Rover EBC brake pads and sophisticated technology.
The special "Brake-In" surface coating provides immediate braking effect after installation and prevents glazing of the brake discs and black spots on disc surface.All EBC brake pads have a centerline slot, this prevents cracking during thermal expansion and also prevents brake noise. The EBC Land Rover high performance brake pads are chamfered on the flanks, these chamfers offer technical advantages in heat generation. At the same time, a significant reduction in brake noise is achieved. It prevents "edge lifting" under the left and right ends of the brake pad, which could lead to corrosion ingress and eventual pad detachment.
Information
Suitable for Defender , Dicovery 1, Range Rover Classic.
The full chassis number contains the correct application. These references are for guidance only.
Mounting kit brake pads Defender front & rear axle without ABS.
Land Rover Defender mounting kit or accessory kit for the brake pads on the front axle and rear axle with non-vented brake discs.
Informatioen
Installed quantity depending on vehicle 1 or 2 set
Quality aftermarket
Suitable for Defender 90 to 130 front axle with unvented brake discs, rear axle Defender 110 and 130
Brake caliper for Land Rover Defender rear axle.
Brake caliper left side rear axle for all Land Rover Defender with 110 and 130 wheelbase from chassis number (V) 1A614448 to year end.
Information
Installed quantity / vehicle 1 piece
Quality original equipment manufacturer (AP Delphi)
Suitable for all Defender from chassis number (V) 1A614448, TD5, TD4 with and without anti-lock braking system (left)
€389.00*
Free shipping
Shipping within 24h
30 days money back guarantee
Purchase comfortable on account
Hotline +49(0)7223-800130-0
We would like to inform you that we will be closed from 12/20/24 to 01/02/25. Your 4WARD4X4 team
This website uses cookies to ensure the best experience possible. More information...